- 10,000+ Products
- Australian Stock & Warranty
- We accept Purchase orders
Ubiquiti Point-to-MultiPoint (PtMP) 5GHz
(inc. of GST)
- 12 payments
- 16 payments
- 6 payments
- 8 payments
*Other fees may apply.
5 GHz PtMP LTU Client with advanced RF performance, functions in a PtMP environment with the LTU-Rocket as the BaseStation
The LTU Pro is a Point-to-MultiPoint (PtMP) 5 GHz high-performance subscriber station. Based on Ubiquiti’s proprietary LTU technology, the LTU Pro is not impeded by the limitations of standard 802.11 Wi-Fi technology. It features an integrated high-gain dish for long range and high performance. Channel width flexibility (10/20/30/40/50 MHz) allows independent TX and RX channel frequency configurations anywhere within the radio band to avoid local interference.
Proprietary LTU Technology
Based on Ubiquiti’s LTU technology, the LTU Pro is not impeded by the limitations of standard 802.11 Wi‑Fi technology. Its custom LTU silicon and radio architecture provide up to 600+ Mbps1 of real TCP/IP throughput and modulation rates of up to 4096QAM2
The LTU Pro supports both bridged and built-in hardware NAT router modes to suit your specific deployment.
Auto Power Adjustments
By default, the Auto Output Power option allows the LTU Pro to set the output power (EIRP) to the appropriate level.
The LTU Pro’s TX output power is controlled by the AP’s target TX output power. A PtMP network can manage signal levels
to enhance network stability and achieve optimal wireless performance with the highest possible modulation.
To manage the LTU Pro, you have two options: the LTU Configuration Interface and Ubiquiti Network Management System
(UNMS™). Either option lets you manually configure the LTU Pro.
Within the LTU Configuration Interface, you can manually configure the LTU Pro or manage it from the AP side using the Find My AP feature. The LTU Pro will automatically scan for APs using the same channel bandwidth. Select the appropriate AP and then use it to configure the LTU Pro.
What’s in it for you?
- PtMP CPE
- 1024 QAM
- 10/20/30/40/50 MHz channel bandwidth
- Central configuration management from AP side
- Frequency split
- Automatic power adjustments
- Router mode support
|Dimensions||316.5 x 316.5 x 174.3 mm (12.46 x 12.46 x 6.86")|
|Weight||1.3 kg (2.87 lb)|
|Networking Interface||(1) 10/100/1000 Ethernet Port|
|Enclosure||Outdoor UV Stabilized Plastic|
|Max. Power Consumption||9W|
|Power Supply||24V, 0.5A Gigabit PoE Adapter (Included)|
|Power Method||24V Passive PoE (Pairs 4, 5+; 7, 8-)|
|Voltage Range||22 -26V|
|Max. Conducted TX Power||22 dBm (per Chain)|
|Sidelobe Level||-10 dB|
|Front-to-Back Ratio||27 dB|
|Mounting||Pole-Mount (Kit Included)|
|Wind Loading||150 N @ 200 km/h (33.72 lbf @ 125 mph)|
|Wind Survivability||200 km/h (125 mph)|
|ESD/EMP Protection||± 24kV Contact/Air|
|Operating Temperature||-5 to 40° C (23 to 104° F)|
|Operating Humidity||10 -90% Noncondensing|
|Certifications||CE, FCC, IC|