Ubiquiti Fiber POE G2 – Gigabit


Ubiquiti Fiber POE G2 – Gigabit

Availability: In stock SKU: F-POE-G2

$52.00 (inc. of GST)

Buy now, pay smarter. Learn more

Ubiquiti Fiber POE G2 – Gigabit

Availability: In stock


Overcome PoE limitations with the next-generation FiberPoE™, model F-POE-G2. The FiberPoE Gen 2 is a low-cost solution for outdoor deployments that require long-distance runs to reach the PoE device. Deployments with the FiberPoE Gen 2 provide significant EMI and ESD protection over typical PoE installations. The FiberPoE Gen 2 also features a durable, weatherproof form factor and enhanced surge protection.

PoE is ideal for indoor or short-run installations. However, for outdoor, long-distance installations, PoE becomes vulnerable to EMI and is limited to 100 meters with correlated power loss. With the FiberPoE Gen 2, data and power are transported on separate cables to greatly improve data integrity and enable much longer cable runs. The FiberPoE Gen 2 provides Gigabit bi-directional data transport between twisted-pair Ethernet cable and fiber optic cable, and injects DC power to the Ethernet cable for passive PoE. Use one FiberPoE Gen 2 device as an Fiber-to-Ethernet Converter, or a pair of FiberPoE Gen 2 devices to create a Fiber Bridge.

Featuring a built-in high-current Gas Discharge Tube (GDT) for the DC terminal block and PoE port, the FiberPoE Gen 2 delivers enhanced surge protection. The added GDT support effectively protects against lightning and other power surges.

Designed for Outdoor Durability

The FiberPoE features an outdoor weatherproof form factor with integrated strain relief management.

Power Versatility

The FiberPoE allows separate power from standard Ethernet cables or standard terminal block / power cable support. There are three ways to configure the input and output power:

What’s in it for you?

  • Provides reliable Gigabit PoE runs over long distances
  • Data and power are transported on separate cables to improve data integrity and allow long cable runs
  • Two FiberPoE GEN2 devices can be used as a fiber bridge, enabling users to utilize them as a fiber optic data link for protection from EMI events that can damage equipment or cause signal problems
  • 24/50V passive PoE transport
  • Integrated fiber cable strain relief provides additional protection and a cleaner installation
  • LED indicators
  • ESD/EMP protection
  • Weatherproof design
  • CE, FCC, and IC certified
Type Injector
Connectors 1 x SFP 1 x Terminal Block 1 x RJ45 Gigabit Ethernet PoE
Power Consumption 1.5 W (Typical)
Surge Protection Yes ;
DC Input Power 24 to 50 VDC
Operating Temperature -40 to 140°F / -40 to 60°C
Operating Humidity 10 to 90%
Certifications CE, FCC, IC, as per Manufacturer
LED Indicators Yes
Material of Construction Polycarbonate
Dimensions 7.7 x 3.7 x 1.3" / 196.4 x 93.5 x 32.4 mm
Weight 10.2 oz / 288 g
Packaging Info
Package Weight 1.175 lb
Box Dimensions (LxWxH) 9.5 x 4.9 x 2.5"