- 10,000+ Products
- Australian Stock & Warranty
- We accept Purchase orders
Ubiquiti UAP-NANOHD-AU Indoor Access Points
(inc. of GST)
- 12 payments
- 16 payments
- 6 payments
- 8 payments
*Other fees may apply.
Compact 802.11ac Wave2 MU-MIMO Enterprise Access Point.
- 2×2 MIMO on 2.4GHz (300Mbps max PHY rate), 4×4 MU-MIMO on 5GHz (1733Mbps max PHY rate)
- Same mount as UAP-AC-Lite.
Deploy the UniFi nanoHD AP in high-density environments requiring maximum wireless performance and minimal footprint. The UniFi nanoHD AP features simultaneous, dual-band, 4×4 MU-MIMO technology and convenient 802.3af PoE compatibility. Available in single- and five‑packs.
What’s in it fir you?
- Low-Profile Mounting The UniFi nanoHD AP’s low‑profile ceiling mount (sold separately) allows you to seamlessly integrate the AP into its environment.
- Compact Form Factor The compact design delivers a cost-effective combination of value and performance.
- LED The unique LED provisioning ring provides administrator location tracking and alerts for each device.
- Power over Ethernet (PoE) Standard The UniFi nanoHD AP can be powered by an 802.3af PoE compliant switch. We recommend powering your UniFi devices with a UniFi PoE Switch (sold separately). The UniFi nanoHD AP is compatible with all UniFi PoE Switches and 48V adapters.
- Superior Processing Power The UniFi nanoHD AP is capable of complex operations (guest control, filtering, and other resource-intensive tasks) that may slow down a lesser-equipped AP.
Guide and Datasheet
|Dimensions - 160 x 160 x 32.65 mm (6.30 x 6.30 x 1.29")|
|Weight - 300 g (10.6 oz)|
|Weight(With Mounting Kits) - 315 g (11.1 oz)|
|Networking Interface - (1) 10/100/1000 Ethernet Port|
|Buttons - Reset|
|Power Method - 802.3af PoE|
|Power Supply - UniFi Switch (PoE)|
|Power Save - Supported|
|Beamforming - Supported|
|Maximum Power Consumption - 10.5W|
|Supported Voltage Range - 44 to 57VDC|
|2.4 GHz - 23 dBm|
|5 GHz - 26 dBm|
|2.4 GHz - 2x2|
|5 GHz - 4x4|
|2.4 GHz - 300 Mbps|
|5 GHz - 1733 Mbps|
|2.4 GHz - (2) Single-Port, Single-Polarity Antennas, 2.8 dBi each|
|5 GHz - (2) Single-Port, Dual-Polarity Antennas, 3 dBi each|
|Wi-Fi Standards - 802.11 a/b/g/n/ac/ac-wave2|
|Wireless Security - WEP, WPA-PSK, WPA-Enterprise (WPA/WPA2, TKIP/AES), 802.11w/PMF|
|BSSID - 8 per Radio|
|Mounting - Wall/Ceiling (Kits Included)|
|Operating Temperature : -10 to 70° C (14 to 158° F)|
|Operating Humidity - 5 to 95% Noncondensing|
|Certifications - CE, FCC, IC|
|UniFi nanoHD AP|
|Ceiling Backing Plate|
|Flat Head Screws (Qty. 4)|
|Keps Nuts (Qty. 4)|
|Screw Anchors (Qty. 4)|
|Gigabit PoE (48V, 0.5A) with Mount Bracket|
|Quick Start Guide|