- 10,000+ Products
- Australian Stock & Warranty
- We accept Purchase orders
Tenda TEG1124P-24-250W – 24-PORT GE POE+ SWITCH
(inc. of GST)
- 12 payments
- 16 payments
- 6 payments
- 8 payments
*Other fees may apply.
The Tenda TEG1124P-24-250W 24-Port Unmanaged Gigabit PoE+ Switch offers twenty-four 10/100/1000 Mbps Base-TX RJ45 ports. Ports 1-24 comply with the IEEE 802.3af standard (maximum PoE power output: 15.4W) and 802.3at standard (maximum PoE power output: 30W).
TEG1124P-24-250W is a Tenda PoE switch that o ers 24 10/100/1000 Mbps Base-TX RJ45 ports. Ports 1-24 comply with the IEEE 802.3af standard (maximum PoE power output: 15.4 W) and 802.3at standard (maximum PoE power output: 30 W). The switch o ers a maximum PoE power output of 225 W and can supply power to and exchange data with APs, IP cameras, and IP phones through CAT5 cables. It also provides simple management modes such as CCTV, VLAN, and Isolation to help reduce cabling costs of IP terminals like APs and IP cameras.
6KV Lightning Protection PoE Switch is the only engineering switch
In real projects,APs and cameras are often installed outdoors or at an elevated location, which increases the chance of lightning strikes on cameras and PoE-powered switches. The result is that individual devices are damaged when the outcome is light, and even the whole local area network is damaged.Tenda TEG11 series switches have professional lightning protection design – 6KV Lightning Protection for Ports and the power,and they have two levels of protection design respectively, which effectively suppress the lightning current from the network cable and power supply, equivalent to adding a security wall to the entire network monitoring system. The test standard is much higher than the national CCCrequest. In the thunderstorm, Tenda TEG11 series switches can also provide a stable and reliable service to the surveillance network and guarantee the normal transmission of the picture.
CCTV, Standard, VLAN and Isolation Operation Modes Offered
Standard: The switch functions as a common unmanaged switch and all the ports of the switch can communicate with each other.
CCTV: The port cache is optimized and PoE ports 1-8 have higher priorities over the other ports. All the ports of the switch can communicate with each other.
VLAN: Ports 1 to 22 are isolated from each other, but can communicate with ports 23 and 24 (uplink ports) respectively.
Isolation: Ports 1 to 12 and ports 13 to 24 belong to two different VLAN. This mode can be used to isolate supervision network and wireless network to make them not interfere with each other.
225W PoE power supply simplified wiring
Ports 1-24 comply with the IEEE802.3af and IEEE802.3at power supply standards. The entire switch offers a maximum PoE power output of 225W, whereas each port offers a maximum PoE power output of 30 W. The ports can be used to supply power to and exchange data with APs and IP cameras.
What’s in it for you?
- 24 10/100/1000 Mbps Base-TX RJ45 ports
- Ports 1-24: IEEE 802.3af/at PoE ports
- maximum power output of the switch: 225W
- 19-inch desktop size, 1U height, rack mountable
- Hardware DIP switch for selection among the CCTV, Standard, VLAN, and Isolation modes
- Hardware DIP switch to VLAN ports to prevent broadcast storm and defend against DHCP spoofing
|IEEE 802.3/IEEE 802.3u/IEEE 802.3ab/IEEE 802.3x/IEEE 802.3af/IEEE 802.3at|
|24*Link/Act per device|
|24*PoE per device|
|1*Power per device|
|24 10/100/1000Base-T ports(Data/Power)|
|Store & Forward|
|Packet Forwarding Rate|
|RAM Data Buffer|
|MAC Address Table|
|PoE supply management|
|Port 1-24 support IEEE802.3at/af PoE standard|
|PoE through pin|
|1 2 4 5 +/3 6 7 8 -|
|440*178*44mm( W x D x H )|
|in full con guration: <250W|
|PoE Max Power Supply: 225W|
|Standard: the switch functions as a common unmanaged switch and all the ports of the switch can communicate with each other.|
|CCTV: the port cache is optimized and PoE ports 1-8 have higher priorities|
|over the other ports. All the ports of the switch can communicate with each other.|
|VLAN: ports 1 to 22 are isolated from each other, but can communicate with ports 23 and 24(uplink ports) respectively.|
|Isolation: ports 1 to 12 and Ports 13 to 24 belong to two di erent VLAN.This mode can be used to isolate supervision network and wireless network to make them not interfere with each other.|
|Operating Temperature: 0℃~40℃ (32℉~104℉)|
|Storage Temperature: -40℃~70℃ (-40℉~158℉)|
|Operating Humidity: 10%~90% non-condensing|
|Storage Humidity: 5%~90% non-condensing|