- 10,000+ Products
- Australian Stock & Warranty
- We accept Purchase orders
Tenda TEG1116P-16-150W – 16-PORT GE POE+ SWITCH
$226.20(inc. of GST)
Buy now, pay smarter. Learn more
TEG1116P-16-150W is a Tenda PoE switch that o ers 16 10/100/1000 Mbps Base-TX RJ45 ports. Ports 1-16 comply with the IEEE 802.3af standard (maximum PoE power output: 15.4 W) and 802.3at standard (maximum PoE power output: 30 W).
TEG1116P-16-150W is a Tenda PoE Switch that offers 16 10/100/1000Mbps Base-TX RJ45 ports 1-16 comply with IEEE 802.3af standard (maximum PoE power output: 15.4 W) and 802.3at standard (maximum PoE power output: 30 W). The switch offers a maximum PoE power output of 135W and can supply power to and exchange data with APs, IP cameras and IP phones through CAT5 cables. It also provides simple management modes such as CCTV, VLAN and isolation to help reduce cabling costs of IP terminals like APs and IP cameras.
6KV Lightning Protection PoE Switch is the only engineering switch
In real projects,APs and cameras are often installed outdoors or at an elevated location, which increases the chance of lightning strikes on cameras and PoE-powered switches. The result is that individual devices are damaged when the outcome is light, and even the whole local area network is damaged.Tenda TEG11 series switches have professional lightning protection design – 6KV Lightning Protection for Ports and the power,and they have two levels of protection design respectively, which effectively suppress the lightning current from the network cable and power supply, equivalent to adding a security wall to the entire network monitoring system. The test standard is much higher than the national CCCrequest. In the thunderstorm, Tenda TEG11 series switches can also provide a stable and reliable service to the surveillance network and guarantee the normal transmission of the picture.
CCTV, Standard, VLAN and Isolation Operation Modes Offered
- Standard: The switch functions as a common unmanaged switch and all the ports of the switch can communicate with each other.
- CCTV: The port cache is optimized and PoE ports 1-8 have higher priorities over the other ports. All the ports of the switch can communicate with each other.
- VLAN: Ports 1 to 14 are isolated from each other, but can communicate with ports 15 and 16 (uplink ports) respectively.
Isolation: Ports 1 to 8 and ports 9 to 16 belong to two different VLAN. This mode can be used to isolate supervision network and wireless network to make them not interfere with each other.
135W PoE power supply simplified wiring
Ports 1-16 comply with the IEEE802.3af and IEEE802.3at power supply standards. The entire switch offers amaximum PoE power output of 135W, whereas each port offers a maximum PoE power output of 30 W. The ports can be used to supply power to and exchange data with APs and IP cameras
What’s in it for you?
- 16 10/100/1000 Mbps Base-TX RJ45 ports
- Ports 1-16: IEEE 802.3af/at PoE ports
- maximum power output of the switch: 135W
- 13-inch desktop size, 1U height, rack mountable
- Hardware DIP switch for selection among the Standard, CCTV, VLAN, and Isolation modes.
|IEEE 802.3/IEEE 802.3u/IEEE 802.3ab/IEEE 802.3x/IEEE 802.3af/IEEE 802.3at|
|16*Link/Act per device|
|16*PoE per device|
|1*Power per device|
|16 10/100/1000Base-T ports(Data/Power)|
|Store & Forward|
|Packet Forwarding Rate|
|RAM Data Buffer|
|MAC Address Table|
|PoE supply management|
|Port 1-16 support IEEE802.3at/af PoE standard|
|PoE through pin|
|1 2 4 5 +|
|3 6 7 8 -|
|294*178*44mm ( W x D x H )|
|in full con‑guration:<150W|
|PoE Max Power Supply:135W|
|Standard: the switch functions as a common unmanaged switch and all the ports of the switch can communicate with each other.|
|CCTV: the port cache is optimized and PoE ports 1-8 have higher priorities over the other ports. All the ports of the switch can communicate with each other.|
|VLAN: ports 1 to 14 are isolated from each other, but can communicate with ports 15 and 16 (uplink ports) respectively.|
|Isolation: ports 1 to 8 and Ports 9 to 16 belong to two di erent VLAN.This mode can be used to isolate supervision network and wireless network to make them not interfere with each other.|
|Operating Temperature: 0℃~40℃ (32℉~104℉)|
|Storage Temperature: -40℃~70℃ (-40℉~158℉)|
|Operating Humidity: 10%~90% non-condensing|
|Storage Humidity: 5%~90% non-condensing|