Tenda TEF1126P-24-250W – 26-PORT FE SWITCH WITH 24-PORT POE+

Tenda TEF1126P-24-250W – 26-PORT FE SWITCH WITH 24-PORT POE+

Availability: Out of stock SKU: TEF1126P-24-250W

$423.93 (inc. of GST)

Or $84.79 today and more time to pay with

The Tenda TEF1126P-24-250W 24-Port Unmanaged Fast Ethernet PoE+ Switch offers twenty-four 10/100 Mbps Base-TX RJ45 ports, one 10/100/1000 Mbps Base-T RJ45 ports, and one 1000 Mbps Base-X SFP port

Availability: Out of stock

Description

TEF1126P-24-250W not only offers 24 10/100 Mbps Base-TX RJ45 ports, but also 1 10/100/1000 Mbps Base-T RJ45 ports and 1 1000 Mbps Base-X SFP port. Ports 1-24 comply with the IEEE 802.3af standard and 802.3at standard and each port can support a maximum PoE power output of 30 W. The switch offers a maximum PoE power output of 135 W and it can supply power when exchanging data with APs, IP cameras, and IP phones through CAT5 cables. It also provides simple management modes such as CCTV, VLAN, and Extend to help reducing cabling costs of IP terminals.

6kV lightning protection

The ports and embedded power can provide lightning protection of up to 6kV. This switch also provides PSE short-circuiting protection, PoE overloading, power over temperature, over voltage and surge current protection.

225W PoE power supply

Ports 1-24 comply with the IEEE 802.3af and IEEE 802.3at power supply standards. The entire switch offers a maximum PoE power output of 225 W with each port offering a maximum PoE power output of 30 W. The ports can be used to supply power to and exchange data with APs and IP cameras.

Operation modes offered

CCTV: 1-8 ports support QoS. If multiple IP cameras are connected to the switch, you are recommended to enable this mode and connect the G1 or SFP1 port of this switch to the upstream device to which the monitoring computer connects. This ensures smoother monitoring video playback.

Standard: the switch functions as a common unmanaged switch and all the ports of the switch can communicate with each other.

VLAN: In this mode, 1-24 ports of the switch cannot communicate with each other, but can communicate with the G1 and SFP1 ports. Solid DIP switch to isolate ports to prevent broadcast storm and defend DHCP spoofing.

Extend: In this mode, the data rate of ports 1-8 of the switch are limited to 10 Mbps, whereas the maximum transmission distance of these ports is increased to 250 metres. All the ports of the switch can communicate with each other.

What’s in it for you?

  • Twenty-four (24) 10/100 Mbps Base-TX RJ45 port.
  • One (1) 10/100/1000 Mbps Base-T RJ45 port.
  • One (1) 100/1000Base-X SFP port.
  • Ports 1-24: IEEE 802.3af/at PoE ports.
  • Maximum power output of each PoE port: 30 W.
  • Maximum power output of the switch: 225 W.
  • 13-inch desktop size.
  • 1U height.
  • Rack mountable.
  • Hardware DIP switch for selection among the CCTV, Standard, VLAN, and Extend modes.
Standard&Protocol
IEEE802.3, IEEE802.3u, IEEE802.3ab, IEEE802.3z, IEEE802.3x, IEEE802.3af/at
LED indicator
24 * Link/Act LEDs
1 * G1 LED
1 * G2/SFP2 LED
1 * PoE-MAX LED
1 * Power LED
Interface
24 * 10/100 Mbps Base-TX RJ45 ports (Data/Power)
2 * 10/100/1000 Mbps Base-T RJ45 ports (Data)
1 * 1000 Mbps Base-X SFP port (Combo)
Forwarding Rate
6.55 Mpps
Switching Capacity
8.8 Gbps
MAC Address Table
16K
Lightning Protection
≥6KV
Input Voltage
AC: 100-240V~50/60Hz
PoE Supply
Ports 1-24 support standard IEEE802.3af/at
30W output per PoE port
230W output of the total PoE Power
Power Consumption
250W output the whole device
Dimension
440*178.8*44mm
Four Modes
Standard: Default mode of the switch. In this mode, it works as an unmanaged switch
all ports can communicate with each other separately.
Priority: In this mode, port G1 and G2/SFP2 serve as uplink ports, ports 1 – 8 serve as high priority port. All ports can communicate with each other separately.
Extend: In this mode, data rate of ports 17 - 24 reduces to 10 Mbps, the maximum transmission distance can be 250 meters, and all ports can communicate with each other.
VLAN: In this mode, ports 1 - 24 of the switch can communicate with port G1, G2/SFP2 separately, but cannot communicate with each other. You can enable this mode to reduce broadcast storm and isolate DHCP broadcast.
Environment
Operating Temperature: 0℃~45℃ (32℉~113℉)
Storage Temperature: -40℃~70℃ (-40℉~158℉)
Operating Humidity: 10%~90% non-condensing
Storage Humidity: 5%~90% non-condensing
Certification
CCC、FCC、CE、RoHS