Teltonika TSW100 – Industrial Unmanaged Switch

Description

TSW100 – 5-port, unmanaged full Gigabit Ethernet switch supporting Power-over-Ethernet (802.3af and 802.3at standards). This device is classified as power source equipment (PSE), and when used in this way, TSW100 switch enables centralization of the power supply, providing up to 30 watts of power per port and reducing the effort for installing power. It has 10/100/1000 Mbps Ethernet ports to provide an economical high-bandwidth solution for your industrial Ethernet network.

ETHERNET
LAN	5 x LAN port, 10/100/1000 Mbps, compliance with IEEE 802.3, IEEE 802.3u, 802.3az standards, supports auto MDI/MDIX crossover
POE
PoE ports	Port 1- 4
PoE standards	802.3af and 802.3at
PoE Max Power per Port (at PSE)	30 W
Total PoE Power Budget (at PSE)	120 W
PERFORMANCE SPECIFICATIONS
Bandwidth (Non-blocking)	10 Gbps
Packet buffer	128 KB
Jumbo frame support	9216 bytes
MAC address table size	2K entries
POWER
Connector	4 pin industrial DC power socket
Input voltage range	7-57 VDC
Input voltage range for PoE	44-57 VDC
Power consumption (idle/max no PoE/max)	2 W/9 W/129 W
PHYSICAL INTERFACES (PORTS, LEDS)
Ethernet	5 x RJ45 ports, 10/100/1000 Mbps
Status LED’s	1 x Power LED, 10 x LAN status LED’s
Power	1 x 4 pin DC connector
Ground	1 x Grounding screw
PHYSICAL SPECIFICATION
Casing material	Full aluminum housing
Dimensions (W x H x D)	115 x 32 x 95 mm
Mounting	DIN rail or wall mounting (additional kit needed), flat surface placement
OPERATING ENVIRONMENT
Operating temperature	-40 °C to +75 °C
Operating humidity	10 % to 90 % non condensing

 

TSW100 Datasheet