| MOBILE |
|
|
4G (LTE) – Cat 4 up to 150 Mbps, 3G – Up to 42 Mbps, 2G – Up to 236.8 kbps |
|
|
2 SIM cards, auto-switch cases: weak signal, data limit, SMS limit, roaming, no network, network denied, data connection fail, SIM idle protection |
|
|
Signal strength, SINR, RSRP, RSRQ, Bytes sent/received |
|
|
Router assigns its mobile WAN IP address to another device on LAN |
|
|
Direct connection (bridge) between mobile ISP and device on LAN |
|
|
Auto APN |
|
|
SMS status, SMS configuration, send/read SMS via HTTP POST/GET, EMAIL to SMS, SMS to EMAIL, SMS to HTTP, SMS to SMS, scheduled SMS, SMS autoreply, SMPP |
|
|
Operator black/white list |
|
|
Possibility to use different PDNs for multiple network access and services |
|
|
Band lock, Used band status display |
| WIRELESS |
|
|
IEEE 802.11b/g/n, Access Point (AP), Station (STA) |
|
|
WPA2-Enterprise (with external/internal Radius server), WPA2-PSK, WPA-PSK, WEP, MAC Filter |
|
|
WPA2-Enterprise - PEAP, TLS, TTLS. AES-CCMP, TKIP, Auto Cipher modes. Client separation |
|
|
SSID stealth mode and access control based on MAC address |
|
|
up to 100 simultaneous connections |
|
|
Captive portal (Hotspot), internal/external Radius server, built in customizable landing page |
| ETHERNET |
|
|
1 x WAN port (can be configured to LAN) 10/100 Mbps, comply IEEE 802.3, IEEE 802.3u standards, supports auto MDI/MDIX |
|
|
3 x LAN ports, 10/100 Mbps, comply IEEE 802.3, IEEE 802.3u standards, supports auto MDI/MDIX |
| NETWORK |
|
|
Static routing, Dynamic routing (BGP, OSPF v2, RIP v1/v2) |
|
|
TCP, UDP, IPv4, IPv6, ICMP, NTP, DNS, HTTP, HTTPS, FTP, SMTP, SSL v3, TLS, ARP, VRRP, PPP, PPPoE, UPNP, SSH, DHCP, Telnet, SMPP, MQTT, Wake On Lan (WOL) |
|
|
H.323 and SIP-alg protocol NAT helpers, allowing proper routing of VoIP packets |
|
|
Ping Reboot, Periodic Reboot, LCP and ICMP for link inspection |
|
|
Port forward, traffic rules, custom rules |
|
|
Static and dynamic IP allocation, DHCP Relay |
- QoS / Smart Queue Management (SQM)
|
Traffic priority queuing by source/destination, service, protocol or port, WMM, 802.11e |
|
|
Supported >25 service providers, others can be configured manually |
|
|
VRRP, Mobile, Wired and WiFi WAN options, each of which can be used as backup, using automatic Failover |
|
|
Balance your internet traffic over multiple WAN connections |
|
|
Mobile connection management, data compression VPN client (not available in standard FW) |
|
|
Possibility to mount remote file system via SSH protocol (not available in standard FW) |
| SECURITY |
|
|
Pre-shared key, digital certificates, X.509 certificates |
|
|
Pre-configured firewall rules can be enabled via web-ui, unlimited firewall configuration via CLI; DMZ; NAT; NAT-T |
|
|
DDOS prevention (SYN flood protection, SSH attack prevention, HTTP/HTTPS attack prevention), port scan prevention ( SYN-FIN, SYN-RST, X-mas, NULL flags, FIN scan attacks) |
|
|
WPA2-Enterprise - PEAP, TLS, TTLS. AES-CCMP, TKIP, Auto Cipher modes. Client separation |
|
|
Port based and tag based VLAN separation |
|
|
Set up custom data limits for both SIM cards |
|
|
Blacklist for blocking out unwanted websites, whitelist for specifying allowed sites only |
|
|
Flexible access control of TCP, UDP, ICMP packets, MAC address filter |
| VPN |
|
|
Multiple clients and server can be running simultaneously, 12 encryption methods |
|
|
DES-CBC, RC2-CBC, DES-EDE-CBC, DES-EDE3-CBC, DESX-CBC, BF-CBC, RC2-40-CBC, CAST5-CBC, RC2-64-CBC, AES-128-CBC, AES-192-CBC, AES-256-CBC |
|
|
IKEv1, IKEv2, supports up to 4 x VPN IPsec tunnels (instances), with 5 encryption methods (DES, 3DES, AES128, AES192, AES256) |
|
|
GRE tunnel |
|
|
Client/Server services can run simultaneously |
|
|
Proxy designed to add TLS encryption functionality to existing clients and servers without any changes in the programs' code |
|
|
SSTP client instance support |
|
|
ZeroTier VPN |
| MODBUS |
| MODBUS TCP SLAVE |
|
|
1-255 |
|
|
Allow access through WAN |
|
|
Modbus TCP custom register block requests, which read/write to a file inside the router, and can be used to extend Modbus TCP Slave functionality |
| MODBUS TCP MASTER |
|
|
01, 02, 03, 04, 05, 06, 15, 16 |
|
|
8 bit: INT, UINT; 16 bit: INT, UINT (MSB or LSB first); 32 bit float (Big endian, Big endian with byte-swapped, Little endian, Little endian with byte-swapped) |
| MODBUS RTU MASTER (RS232) |
|
|
From 300 to 115200 |
|
|
01, 02, 03, 04, 05 (only for alarms), 06 (only for alarms), 15 (only for alarms), 16 (only for alarms) |
|
|
From 5 to 8 |
|
|
1 or 2 |
|
|
None, Even, Odd |
|
|
None, RTS/CTS, Xon/Xoff |
|
|
Full duplex |
| MODBUS RTU MASTER (RS485) |
|
|
From 300 to 115200 |
|
|
01, 02, 03, 04, 05 (only for alarms), 06 (only for alarms), 15 (only for alarms), 16 (only for alarms) |
|
|
8 |
|
|
1 |
|
|
None, Even, Odd |
|
|
None, Xon/Xoff |
|
|
Half duplex |
| MODBUS DATA TO SERVER |
|
|
HTTP(S), MQTT, Azure MQTT |
| MQTT GATEWAY |
|
|
Allows sending commands and receiving data from Modbus Master through MQTT broker |
| MONITORING & MANAGEMENT |
|
|
HTTP/HTTPS, status, configuration, FW update, CLI, troubleshoot, event log, system log, kernel log |
|
|
Firmware update from server, automatic notification |
|
|
SSH (v1, v2) |
|
|
SMS status, SMS configuration, send/read SMS via HTTP POST/GET |
|
|
Reboot, Status, WiFi on/off, Mobile data on/off, Output on/off, answer/hang-up with a timer |
|
|
OpenACS, EasyCwmp, ACSLite, tGem, LibreACS, GenieACS, FreeACS, LibCWMP, Friendly tech, AVSystem |
|
|
MQTT Broker, MQTT publisher |
|
|
SNMP (v1, v2, v3), SNMP trap |
|
|
Management API over HTTP/HTTPS |
|
|
MODBUS TCP status/control |
|
|
Teltonika Remote Management System (RMS) |
| IoT PLATFORMS |
|
|
Allows monitoring of: Device data, Mobile data, Network info, Availability |
|
|
Allows monitoring of: WAN Type, WAN IP Mobile Operator Name, Mobile Signal Strength, Mobile Network Type |
|
|
Allows monitoring of: Device Model, Revision and Serial Number, Mobile Cell ID, ICCID, IMEI, Connection Type, Operator, Signal Strength, WAN Type and IP |
|
|
Can send device IP, Number of bytes send/received/ 3G connection state, Network link state, IMEI, ICCID, Model, Manufacturer, Serial, Revision, IMSI, Sim State, PIN state, GSM signal, WCDMA RSCP WCDMA EC/IO, LTE RSRP, LTE SINR, LTE RSRQ, CELL ID, Operator, Operator number, Connection type, Temperature, PIN count to Azure IoT Hub server |
| SYSTEM CHARACTERISTICS |
|
|
Atheros Wasp, MIPS 74Kc, 550 MHz |
|
|
128 MB, DDR2 |
|
|
16 MB SPI Flash |
| FIRMWARE / CONFIGURATION |
|
|
Update FW from file, check FW on server, configuration profiles, configuration backup, restore point |
|
|
Update FW/configuration from server |
|
|
Update FW/configuration for multiple devices |
|
|
Update FW without losing current configuration |
| FIRMWARE CUSTOMIZATION |
|
|
RutOS (OpenWrt based Linux OS) |
|
|
Busybox shell, Lua, C, C++ |
|
|
SDK package with build environment provided |
| LOCATION TRACKING |
|
|
GPS, GLONASS, BeiDou, Galileo and QZSS |
|
|
GNSS coordinates via WebUI, SMS, TAVL, RMS |
|
|
NMEA 0183 |
|
|
NTRIP protocol (Networked Transport of RTCM via Internet Protocol) |
|
|
supported server software TAVL, RMS |
- Mobile Network Geolocation
|
Location without using GPS, get approximate location based on mobile tower on RMS |
|
|
Configurable multiple geofence zones |
| SERIAL |
|
|
DB9 connector, full RS232 (with RTS, CTS) |
|
|
RS485 Full Duplex (4 wires) and Half Duplex (2 wires). 300-115200 baud rate |
|
|
Console, Serial over IP, Modem, Modbus gateway, NTRIP Client |
| INPUT/OUTPUT |
|
|
1 x digital input (0 - 3 V), 1 x digital galvanically isolated input (0 - 30 V), 1 x analog input (0 - 24 V), 1 x Digital non-isolated input (on 4 pin power connector) |
|
|
1 x digital open collector output (30 V, 250 mA), 1 x SPST relay output (40 V, 4 A), 1 x Digital open collector output (30 V, 300 mA, on 4 pin power connector) |
|
|
SMS, EMAIL, RMS |
| USB |
|
|
USB 2.0 |
|
|
Samba share, custom scripts |
|
|
Possibility to connect external HDD, flash drive, additional modem, printer |
|
|
FAT, FAT32, NTFS |
| SD CARD |
|
|
Micro SD |
|
|
Samba share, custom scripts |
|
|
Up to 32 GB |
| POWER |
|
|
4 pin industrial DC power socket |
|
|
9 – 30 VDC (4 pin industrial socket), reverse polarity protection; surge protection >31 VDC 10us max |
|
|
Passive PoE over spare pairs. Possibility to power up through LAN port, not compatible with IEEE802.3af and 802.3at standards |
|
|
< 2 W idle, < 7 W Max |
| PHYSICAL INTERFACES (PORTS, LEDS, ANTENNAS, BUTTONS, SIM) |
|
|
4 x RJ45 ports, 10/100 Mbps |
|
|
10 Inputs/Outputs pin connector, 2 Inputs/Outputs pin on 4 pin power connector (available from HW revision 1600) |
|
|
1 x bi-color connection status LED, 5 x connection strength LEDs, 4 x LAN status LEDs, 1 x Power LED |
|
|
2 x SIM slots (Mini SIM - 2FF), 1.8 V/3 V, external SIM holders, eSIM (Optional) |
|
|
4 pin power connector with 2 pins for Input/Output |
|
|
10 pin industrial socket for inputs/outputs |
|
|
2 x SMA for LTE, 1 x SMA for GNSS, 2 x RP-SMA for WiFi antenna connectors |
|
|
USB A port for external devices |
|
|
Micro SD card slot |
|
|
DB9 socket for full-featured RS232 |
|
|
6 pin industrial socket for 2/4 wire RS485 |
|
|
Reset/restore to default button |
| PHYSICAL SPECIFICATION |
|
|
Aluminium housing, plastic panels |
|
|
100 x 110 x 50 mm (L x W x H) |
|
|
287 g |
|
|
DIN rail (can be mounted on two sides), flat surface placement |
| OPERATING ENVIRONMENT |
|
|
-40 °C to 75 °C |
|
|
10% to 90% non-condensing |
- Ingress Protection Rating
|
IP30 |
|
|
230000 h |
| REGULATORY & TYPE APPROVALS |
|
|
CE/RED, FCC, IC/ISED, EAC, RCM, PTCRB, RoHS, WEEE, Wi-Fi Alliance CE/RED, FCC, IC, PTCRB, RCM, EAC, CCC, RoHS, WEEE, IP rating, Anatel, GCF, REACH, E-mark, DNV GL, ECE Regulation 118, Morocco ANRT, Thailand NBTC, Ukraine UCRF, SDPPI (POSTEL), WiFi Certified, Modbus Conformance |
|
|
AT&T, Verizon |
|
|
ECE R10 (E-mark)
ECE R118 |
| EMI IMMUNITY |
|
|
Draft EN 301 489-1 V2.2.0, Draft EN 301 489-17 V3.2.0, Draft EN 301 489-19 V2.1.0, Draft EN 301 489-52 V1.1.0
FCC 47 CFR Part 15B (2017), ANSI C63.4 (2014) |
|
|
EN61000-4-2:2009 |
|
|
EN 61000-4-3:2006 + A1:2008 + A2:2010 |
|
|
EN 61000-4-4:2012 |
- Surge immunity (AC Power Line)
|
EN 61000-4-5:2006 |
- Surge immunity (Ethernet ports)
|
EN 61000-4-5:2014, clause 7.1 of ITU-T K21 |
|
|
ISO 7632-2:2004 |
|
|
EN 61000-4-6:2009 |
|
|
EN 61000-4-11:2004 |
| RF |
|
|
EN 300 328 V2.1.1, EN 301 511 V12.5.1, EN 301 908-1 V11.1.1, EN 301 908-2 V11.1.1, EN 301 908-13 V11.1.1, EN 303 413 V1.1.0
AS/CA S042.1:2018, AS/ACIF S042.3:2005, AS/CA S042.4:2018, AS/NZS 4268:2017
FCC 47 CFR Part 15C (2017), FCC 47 CFR Part 2 (2017), FCC 47 CFR Part 22H (2017), FCC 47 CFR Part 24E (2017), FCC 47 CFR Part 27C (2017)
RSS-Gen Issue 4 (2014), RSS-247 Issue 2 (2017), RSS-132 Issue 3 (2013), RSS-133 Issue 6 (2013), RSS-139 Issue 3, RSS-130 Issue 1 |
| SAFETY |
|
|
IEC 60950-1:2005 (Second Edition) + Am 1:2009 + Am 2:2013
AS/NZS 60950.1:2015
EN 50665:2017, EN 62311:2008
FCC 47 CFR Part 1 1.1310
RSS-102 Issue 5 (2015) |
| ENVIRONMENTAL |
|
|
LST EN 60529:1999+A1+AC:2002 |
|
|
Class guideline-DNVGL-CG-0339:2016
EN 60068-2-6:2008 |
|
