-26%

Teltonika RUT360 – Instant CAT6 LTE Failover | Compact and Powerful Industrial 4G LTE Cat 6 Router/Firewall, Rugged Aluminium Housing – On Promotion

$373.00 (inc. of GST)

Teltonika RUT360 – Instant CAT6 LTE Failover | Compact and Powerful Industrial 4G LTE Cat 6 Router/Firewall, Rugged Aluminium Housing – On Promotion

Availability: In stock SKU: RUT360000300 Category:
Teltonika logo - myithub
Availability: In stock

Description

RUT360 is an updated version of our all-time best-seller RUT240. This compact industrial cellular router offers a possibility to connect to the internet using cellular, Wi-Fi, and wired networks.

RUT360 is equipped with two Ethernet interfaces, 802.11 b/g/n WiFi, and 4G LTE Cat 6 cellular module, offering data speeds up to 300 Mbps.

Unique programming, remote monitoring, and security features make RUT360 perfect for IoT and M2M applications, where secure and reliable connectivity is a must. Carrier aggregation functionality makes this compact device irreplaceable in areas or applications where cellular data speeds are limited.

What’s in it for you?

  • 4G LTE CAT 6:Cellular speeds up to 300Mbps with Carrier Aggregation
  • WIFI:802.11 b/g/n WiFi
  • COMPACTNESS:Small size – easy integration anywhere
  • DURABILITY:Rugged aluminium housing
  • SECURITY:Firewall and numerous VPN services, including OpenVPN, IPsec, PPTP, L2TP & SSTP
  • RMS:Compatible with Teltonika Remote Management System
 
MOBILE
Mobile module
  • 4G (LTE) – Cat 6 up to 300 Mbps, 3G – Up to 42 Mbps
Status
  • Signal strength, SINR, RSRP, RSRQ, Bytes sent/received, connected band, carrier aggregation, IMSI, ICCID
SMS
  • SMS status, SMS configuration, send/read SMS via HTTP POST/GET, Email to SMS, SMS to Email, SMS to HTTP, SMS to SMS, SMS auto reply
USSD
  • Supports sending and reading Unstructured Supplementary Service Data messages
Black/Whiles list
  • Operator black/white list
Multiple PDN
  • Possibility to use different PDNs for multiple network access and services
Band management
  • Band lock, Used band status display
APN
  • Auto APN
Bridge mode
  • Direct connection (bridge) between mobile ISP and device on LAN
WIRELESS
Wireless mode
  • 802.11 b/g/n, 2x2 MIMO, Access Point (AP), Station (STA)
WiFi security
  • WPA3-EAP, WPA3-SAE, WPA2-Enterprise-PEAP, WPA2-PSK, WEP; AES-CCMP, TKIP, Auto Cipher modes, client separation
ESSID
  • ESSID stealth mode
Wireless Hotspot
  • Captive portal (Hotspot), internal/external Radius server, SMS OTP, MAC auth, built in customizable landing page, walled garden
ETHERNET
WAN
  • 1 x WAN port (can be configured as LAN) 10/100 Mbps, compliance with IEEE 802.3, IEEE 802.3u standards, supports auto MDI/MDIX crossover
LAN
  • 1 x LAN ports, 10/100 Mbps, compliance with IEEE 802.3, IEEE 802.3u standards, supports auto MDI/MDIX crossover
NETWORK
Routing
  • Static routes, Dynamic routes
Network protocols
  • TCP, UDP, IPv4, IPv6, ICMP, NTP, DNS, HTTP, HTTPS, FTP, SMTP, SSL v3, TLS, ARP, VRRP, PPP, PPPoE, UPNP, SSH, DHCP, Telnet client, SNMP, MQTT, Wake on LAN (WOL)
VoIP passthrough support
  • H.323 and SIP-alg protocol NAT helpers, allowing proper routing of VoIP packets
Connection monitoring
  • Ping Reboot, Wget reboot, Periodic Reboot, LCP and ICMP for link inspection
Firewall
  • Port forwards, traffic rules, NAT rules, custom rules
DHCP
  • Static and dynamic IP allocation, DHCP Relay, Relayd
QoS / Smart Queue Management (SQM) ()
  • Traffic priority queuing by source/destination, service, protocol or port, WMM, 802.11e
DDNS
  • Supported >25 service providers, others can be configured manually
Network backup
  • Mobile, Wired and WiFi WAN options, each of which can be used as an automatic Failover
Load balancing
  • Balance Internet traffic over multiple WAN connections
SSHFS
  • Possibility to mount remote file system via SSH protocol
SECURITY
Authentication
  • Pre-shared key, digital certificates, X.509 certificates
Firewall
  • Pre-configured firewall rules can be enabled via WebUI, unlimited firewall configuration via CLI; DMZ; NAT; NAT-T
Attack prevention
  • DDOS prevention (SYN flood protection, SSH attack prevention, HTTP/HTTPS attack prevention), port scan prevention (SYN-FIN, SYN-RST, X-mas, NULL flags, FIN scan attacks)
VLAN
  • Tag based VLAN separation
Mobile quota control
  • Custom data limits for both SIM cards
WEB filter
  • Blacklist for blocking out unwanted websites, Whitelist for specifying allowed sites only
Access control
  • Flexible access control of TCP, UDP, ICMP packets, MAC address filter
VPN
OpenVPN
  • Multiple clients and a server can run simultaneously, 12 encryption methods
OpenVPN Encryption
  • DES-CBC, RC2-CBC, DES-EDE-CBC, DES-EDE3-CBC, DESX-CBC, BF-CBC, RC2-40-CBC, CAST5-CBC, RC2-64-CBC, AES-128-CBC, AES-192-CBC, AES-256-CBC
IPSec
  • IKEv1, IKEv2, with 5 encryption methods for IPsec (DES, 3DES, AES128, AES192, AES256)
GRE
  • GRE tunnel
PPTP, L2TP
  • Client/Server instances can run simultaneously, L2TPv3 support
Stunnel
  • Proxy designed to add TLS encryption functionality to existing clients and servers without any changes in the program’s code
DMVPN
  • Method of building scalable IPsec VPNs
SSTP
  • SSTP client instance support
ZeroTier
  • ZeroTier VPN client support
WireGuard
  • WireGuard VPN client and server support
MODBUS
MODBUS TCP SLAVE
ID filtering
  • Respond to one ID in range [1;255] or any
Allow remote access
  • Allow access through WAN
Custom registers Modbus TCP custom register block, which allows to read/write to a file inside the router, and can be used to extend Modbus TCP slave functionality
MODBUS TCP MASTER
Supported functions
  • 01, 02, 03, 04, 05, 06, 15, 16
Supported data formats
  • 8 bit: INT, UINT; 16 bit: INT, UINT (MSB or LSB first); 32 bit: float, INT, UINT (ABCD (big-endian), DCBA (little-endian), CDAB, BADC), HEX, ASCII
MQTT GATEWAY
Gateway
  • Allows sending commands and receiving data from Modbus Master trough MQTT broker
DNP3
Supported modes
  • TCP Master, DNP3 Outstation
DATA TO SERVER
Protocols
  • HTTP(S), MQTT, Azure MQTT, Kinesis
MONITORING & MANAGEMENT
WEB UI
  • HTTP/HTTPS, status, configuration, FW update, CLI, troubleshoot, event log, system log, kernel log
FOTA
  • Firmware update from server, automatic notification
SSH
  • SSH (v1, v2)
SMS
  • SMS status, SMS configuration, send/read SMS via HTTP POST/GET
Call
  • Reboot, Status, Mobile data on/off, Output on/off
MQTT
  • MQTT Broker, MQTT publisher
SNMP
  • SNMP (v1, v2, v3), SNMP trap
JSON-RPC
  • Management API over HTTP/HTTPS
Modbus
  • Modbus TCP status/control
RMS
  • Teltonika Remote Management System (RMS)
IoT PLATFORMS
Clouds of things
  • Allows monitoring of: Device data, Mobile data, Network info, Availability
ThingWorx
  • Allows monitoring of: WAN Type, WAN IP, Mobile Operator Name, Mobile Signal Strength, Mobile Network Type
Cumulocity
  • Allows monitoring of: Device Model, Revision and Serial Number, Mobile Cell ID, ICCID, IMEI, Connection Type, Operator, Signal Strength, WAN Type and IP
Azure IoT Hub
  • Can send device IP, Number of bytes send/received, Mobile connection state, Network link state, IMEI, ICCID, Model, Manufacturer, Serial, Revision, IMSI, SIM State, PIN state, GSM signal, WCDMA RSCP, WCDMA EC/IO, LTE RSRP, LTE SINR, LTE RSRQ, CELL ID, Operator, Operator number, Connection type, Temperature, PIN count to Azure IoT Hub server
SYSTEM CHARACTERISTICS
CPU
  • QCA9531, MIPS 24kc, 650 MHz
RAM
  • 128 MB, DDR2
FLASH storage
  • 16 MB, SPI Flash (optional up to 256 MB)
FIRMWARE / CONFIGURATION
WEB UI
  • Update FW from file, check FW on server, configuration profiles, configuration backup
FOTA
  • Update FW/configuration from server
RMS
  • Update FW/configuration for multiple devices at once
Keep settings
  • Update FW without losing current configuration
INPUT/OUTPUT
Configurable I/O
  • 2 x Configurable digital Inputs/Outputs. Digital input 0 - 5 V detected as logic low, 8 - 30 V detected as logic high. Open collector output, max output 30 V, 300 mA
Events
  • SMS, Email, RMS
I/O juggler
  • Allows to set certain I/O conditions to initiate event
POWER
Connector
  • 4 pin industrial DC power socket
Input voltage range
  • 9 - 30 VDC, reverse polarity protection, voltage surge/transient protection
Power consumption
  • 10.5 W max
PHYSICAL INTERFACES (PORTS, LEDS, ANTENNAS, BUTTONS, SIM)
Ethernet
  • 2 x RJ45 ports, 10/100 Mbps
I/Os
  • 2 x Configurable digital Inputs/Outputs on 4 pin power connector
Status LEDs
  • 2 x Mobile connection type, 3 x Mobile connection strength, 2 x Eth status, 1 x Power
SIM
  • 1 x SIM slots (Mini SIM - 2FF), 1.8 V/3 V, external SIM holders
Antenna
  • 2 x SMA for LTE, 2 x RP-SMA for WiFi
Power
  • 1 x 4 pin DC connector
Reset
  • Reboot/User default reset/Factory reset button
PHYSICAL SPECIFICATION
Casing material
  • Aluminium housing with DIN rail mounting option
Dimensions (W x H x D)
  • 100 x 30 x 85 mm
Weight
  • 247 g
Mounting options
  • DIN rail, flat surface placement
OPERATING ENVIRONMENT
Operating temperature
  • -40 C to 75 C
Operating humidity
  • 10 % to 90 % non-condensing