- 10,000+ Products
- Australian Stock & Warranty
- We accept Purchase orders
Fibaro Bypass 2
$26.39(inc. of GST)
Buy now, pay smarter. Learn more
The Fibaro Dimmer Bypass 2 is designed to support Fibaro Z-Wave In-Wall Dimmer 2 by enabling it to control and dim lights which draw minimum 5W
It can be used in case of connecting LED bulbs or energy saving compact fluorescent lamps. Fibaro Dimmer Bypass 2 prevents flickering of the LED lights and glowing of the turned off compact fluorescent lamps. In the case of 2-wire connection, Fibaro Dimmer Bypass 2 allows to reduce minimum power of load required by the Fibaro Dimmer 2 for correct operation. Fibaro Dimmer Bypass 2 provides powering of the Fibaro Dimmer 2 in case of controlling the low loads of minimum power down to 5VA (for cosφ>0.5)
HOW IT WORKS
FIBARO Bypass 2 complements the Dimmer 2. Once you add this module to your installation, you will be able to control and dim low-voltage loads, such as single LED bulbs which consume as little as 0.5W in power. You still need to make sure that you use a DIMMABLE bulb if you’d like to get advantage of the Dimmer’s brightness adjustment functionality.
What’s in it for you?
- Works as an accessory to FIBARO Dimmer 2 only
- Connect LEDs to your FIBARO Dimmer 2 without neutral wire!
- Use with small loads connected to FIBARO Dimmer 2, like a single 0.5W LED bulb
- Eliminates flickering and glowing effect for LEDs and CFLs
|Power consumption: < 1.4W|
|Operating temperature: 0 - 95 F|
|Dimensions: 1.22" x 0.85" x 0.51"|
|Weight: 2.0 oz|
|Installation: Indoor Use Only|