Fanvil PA2 SIP Paging Gateway

Fanvil PA2 SIP Paging Gateway

Availability: In stock SKU: PA2

$250.47 (inc. of GST)

Or $50.09 today and more time to pay with

Compatible with all the current SIP IPPBX /IMS platforms, such as Asterisk, Broadsoft, 3CX, Elastix, etc.

Availability: In stock

Description

PA2 is a SIP video intercom & Paging device for industry application. The media stream transmission adopts standard IP/RTP/RTSP protocol. It inherits the advantages of the stability and the sound quality of FANVIL VOIP Phone. It is perfectly compatible with all the current SIP IPPBX /IMS platforms, such as Asterisk, Broadsoft, 3CX, Elastix, etc.

It has various functions and interfaces, Such as Intercom, broadcast, video , security, recording, to adapt different application environment, you can very easy to DIY your video intercom & paging equipment. PA2 is the best choice for everyone.

What’s in it for you?

  • Small and exquisite, can be embedded in the internal installation
  • Emergency call button interface, active call
  • Interact with IPC camera, you can make a video phone call
  • NVR video recording, standard RJ45 interface
  • Recording output, 3.5mm standard audio interface
  • 10W-30W adaptive output power
  • System online management and upgrade
Physical features
2 RJ45 interface: Yellow: WAN port 10 / 100M adaptive, support POE
PoE: 802.3af (Class 3: 6.49 ~ 12.95W)
Black: LAN port (Only connected to the original camera)
Cable: Super five lines or better  1 blue indicator (SIP status and network status)
2 volume plus or minus key
1 restore factory settings key
1 recording output interface: 3.5mm standard audio interface 15 Ohm impedance  1 ground screw  1 way passive speaker interface: Output power: 4Ω, POE / 10W, 12V / 10W,18V / 20W, 24V / 30W; related to supply voltage. Wire diameter: 18 AWG or larger diameter Interface:Pluggable terminal block
1 headset speaker:Output: 32 Ohm 1.2V interface :Pluggable terminal block
1 DSS key interface (4 lines): Indicator: Output 5.0V 5mA
1 way microphone input interface: Recommendation: Use an electret condenser microphone Sensitivity: -38dB, Impedance 2.2 K Ohm bias voltage 2.2V,Interface - Pluggable terminal block
1 short circuit input and output interface (built-in relay): Relay: MAX DC30V / 1A, AC125V /0.5A,Interface - pluggable terminal block
2 parallel power input interface: 12V-24V / 2A DC 1 road for the 5.5mm
DC power seat 1 road way 2Pin pluggable terminal block
Standby power consumption: DC12V 1.32W / POE 1.78W
Housing material: aluminum alloy shell
Installation: Indoor installation  Operating temperature: -30 ~ 70 ℃
Storage temperature: -40 ~ 70 ℃
Relative humidity: 10% - 95%
Equipment size: 113x83x28mm
Packing size: 138x108x77mm
Equipment weight: 250g