Epygi QX-E1T1-0000 – QXE1T1, Single Port PRI ISDN Gateway

-12%

Epygi QX-E1T1-0000 – QXE1T1, Single Port PRI ISDN Gateway

Availability: Out of stock SKU: QX-E1T1-0000

$1,525.00 (inc. of GST)

Or $305.00 today and more time to pay with

QXE1T1, Single Port PRI ISDN Gateway

Availability: Out of stock

Description

Epygi QX-E1T1-0000 QXE1T1, Single Port PRI ISDN Gateway

The QXE1T1 Gateway features 30 channels for E1 and 20 channels for T1 of compressed G.729 codec and conforms to a broad variety of voice codecs and signaling protocols.

The QXE1T1 Gateway features 30 channels for E1 and 20 channels for T1 of compressed G.729 codec and conforms to a broad variety of voice codecs and signaling protocols. The QXE1T1 Gateway also includes call routing and auto attendant capabilities, voice prioritization over data and sophisticated firewall and security elements. The main function of this Gateway is primarily to bridge traditional PBX traffic to the Internet, thus reducing costs and simplifying system administration.

The primary function of this system is to bridge traditional E1 or T1 trunking from the PSTN to a QX IP PBX. Alternatively, it can connect legacy PBXs to the Internet to take advantage of cost-saving SIP trunks. The QXE1T1 has VPN capability and an Auto Attendant for two-stage dialing.

All products are guaranteed a One Year Warranty, an additional Three Year Warranty is available for purchase.

What’s in it for you?

  • The primary function of this system is to bridge traditional PBX traffic to the Internet.
  • A single E1/T1 port supports 30 and 24 simultaneous calls for E1 and T1 devices respectively.
  • Integrating this product with any QX IP PBX allows the Gateway to then be managed through the IP PBX’s GUI.
  • PBX Features – Call Detail Records, Call routing,Multi-level Auto Attendant with Interactive Voice Response (IVR) and VoiceXMLv2 support
    G3 fax support: T.38 and clear channel fax.
  • System Capacity – 30 or 24 IP-PSTN calls via E1 or T1 respectively with external parties.
  • Firewall security via: Intrusion Detection System (IDS), Network Address Translation (NAT),Policy and service-based filtering State ful inspection firewall.

Datasheet

Physical Interfaces 1 E1/T1 ports to the central office (RJ45), 1 LAN Ethernet 10/100 BASE-T, 1 WAN Ethernet 10/100BASE TX (RJ45)
System Capacity 30 or 24 IP-PSTN calls via E1 or T1 respectively with external parties
Measurements  8.0” x 4.0” x 1.6” (20.5 x 10.5 x 4.0 cm)
Weight  1.28 lbs. (580 g)
Operating temperature 41°F - 104°F (5°C - 40°C)
Storage temperature  41°F - 140°F (5°C - 60°C)
Non-condensing humidity  5% - 90%
Power Supply Input: 85-264VAC, 47-63Hz, AC  0.4A/115VAC, 0.2A/230VAC; Auxiliary output power: 12.0VDC, 0.6A (max)