- 10,000+ Products
- Australian Stock & Warranty
- We accept Purchase orders
D-Link DWL-8710AP Unified Wireless AC Dual Band Concurrent Outdoor PoE Access Point for DWS-3160, DWS-4026, DWC-1000, DWC-2000
$179.00(inc. of GST)
Buy now, pay smarter. Learn more
Compatible Controllers – DWS-4026, DWS-3160, DWC-1000, DWC-2000
DWL-8710AP is an outdoor Dual-Band 802.11n/ac Wi-Fi Access Point designed specifically for deployment in business and campus environments
The DWL-8710AP is an outdoor Dual-Band 802.11n/ac Wi-Fi Access Point designed specifically for deployment in business and campus environments. Highly manageable and capable of blazing speeds, the DWL-8710AP integrates seamlessly into existing network infrastructure and can be easily scaled to meet future demands.
The DWL-8710AP is equipped with two radio transceivers. The first is a 2.4 GHz 2×2 IEEE 802.11n interface that supports up to 300 Mbps of network throughput while the second one is a 5 GHz 2×2 IEEE 802.11ac interface, capable of up to 867 Mbps of network throughput. The DWL-8710AP also features two Gigabit Ethernet network interfaces, designed to allow the administrator to easily bridge other networking devices into the network, such as a camera or another Wi-Fi access point.
The DWL-8710AP is IP67-compliant and is designed to operate in harsh outdoor environments and temperatures ranging from -30 up to 60 ˚C. In addition, all network interfaces are protected against electrical surges, enabling the device to be placed in areas where there is a risk of being struck by lightning.
When deployed in conjunction with D-Link’s line of Unified Wireless Switches, up to 1024 DWL-8710APs may be centrally managed and provisioned, enabling the administrator to scale the Wi-Fi network to cover larger areas.
The DWL-8710AP supports all the latest in Wi-Fi security, including WPA, WPA2, and 802.1X. In addition, the DWL-8710AP supports up to 32 Virtual Access Points (VAP), which gives the administrator the flexibility to easily assign access privileges to different classes of users. When used together with D-Link’s line of Unified Wireless Switches, security can be taken to a new level. Rogue APs in the network may be easily detected, and the administrator will be immediately notified of any security threat.
Automatic Radio Frequency (RF) Management
When a number of access points are deployed close to each other, interference may result if proper RF management is not implemented. When a DWL-8710AP senses a neighbor AP nearby, RF management will make it so that the DWL-8710AP will automatically select a non-interfering channel. This greatly reduces RF interference and makes it possible to deploy APs more densely. To further minimize interference, the DWL-8710AP will automatically lower its transmitting power when an adjacent AP is operating on the same channel. If a nearby AP is no longer present, the DWL-8710AP will dynamically increase its transmitting power again to increase wireless coverage.
Quality of Service
The DWL-8710AP supports Wi-Fi Multimedia (WMM), which prioritizes time sensitive traffic in the event of a network data congestion. Furthermore, when a number of DWL-8710APs are in close proximity with each other, an access point will refuse new association requests once its resources are fully utilized. Instead, the association request will be picked up by a neighboring unit. This feature ensures that a single access point is never overloaded while others remain underutilized. Furthermore, the administrator has the option to limit the bandwidth on a per-user basis, avoiding scenarios where a particular client might use up all the available bandwidth, affecting the performance of other users on the network.
What’s in it for you?
- 11ac wireless technology
- Concurrent 2.4GHz and 5GHz dualband
- IP67 rating for outdoor use
- Detachable antennas for 2.4GHz and 5GHz
- Two Gigabit LAN ports
- Beamforming and Bandsteering technologies
- Standalone and controller managed operation
- PoE+ support (802.3at), PoE injector included
- Wall and pole mounting kits included
Datasheet and Guide
|802.11a/g/n/ac 2x2 MIMO|
|2 x 10/100/1000 LAN ports|
|4 N-Type antenna connectors (2 x 2.4 GHz, 2 x 5 GHz)|
|2 x 7 dBi gain for 5 GHz radio|
|2 x 5 dBi gain for 2.4 GHz radio|
|4 external omni-directional antennas included|
|PoE-powered through port LAN1 marked PoE-Input|
|Up to 32 SSIDs, 16 per radio|
|WPA/WPA2 Personal/ Enterprise|
|Detection & Prevention|
|Rogue and Valid AP Classification|
|MAC Address Filtering|
|250 x 220 x 45 mm (9.48 x 8.66 x 1.77 inch) excluding mounting base|
|2053 g (4.53 lbs) with antennas attached|
|1795 g (3.96 lbs) without antennas attached|
|16.5 W maximum|
|Power over Ethernet|
|IEEE 802.3at compliant Power over Ethernet|
|Metal and polycarbonate|
|Operating: -40 to 70 °C (-40 to 158 °F)|
|Storage: -40 to 70 °C (-40 to 158 °F)|
|Operating: 10% to 90% non-condensing|
|4 antenna connector caps|
|Grounding wire and screw|
|Wall mounting base plate|
|Pole mounting bracket|
|Mounting kit (bolts, washers, nuts, screws, pole strap)|
|CD-ROM with documentation|