CyberData 11211 – Single Button IP Intercom/Access Controller Indoor Case, PoE, Signal White Housing

-15%

CyberData 11211 – Single Button IP Intercom/Access Controller Indoor Case, PoE, Signal White Housing

Availability: Out of stockSKU: 11211

$979.00$828.00(inc. of GST)

Or $165.60 today and more time to pay with

Single Button IP Intercom/Access Controller Indoor Case, PoE, Signal White Housing

Availability: Out of stock

Description

Single Button IP Intercom/Access Controller Indoor Case, PoE, Signal White Housing

Cyberdata’s latest Version 3 SIP-enabled IP Indoor Intercom is a Power over Ethernet (PoE 802.3af) and VoIP (Voice over IP) two-way communication and door entry device, with enhanced performance specifications.

Cyberdata’s latest Version 3 Indoor intercom adds new features to those offered by the previous V2 model, and utilises a new and faster processor giving enhanced performance specifications. This makes the newest version of the CyberData SIP-enabled VoIP Indoor Intercom perfect for environments requiring two-way communication and secure access. The Intercom easily connects into existing local area networks with a single cable connection and is compatible with most SIP-based IP-PBX servers that comply with RFC 3261.

In addition to it’s primary intercom function, the V3 VoIP Intercom can be configured as a Night Ringer with two SIP extensions. One extension can be assigned to a page group for auto answer paging. The second extension can be assigned to a “First-to-Answer” Night Ring group with IP phones. An audio ring file is activated when the second SIP extension of the Intercom is dialed. If any of the IP phones in the ring group is answered (or if the caller hangs up), the Intercom stops ringing. 

A dry contact relay is provided for Door Control applications.

The V3 Intercom now supports SRST (Survivable Remote Site Telephony) in Cisco environments. SRST parameters are entered statically into the V3 Intercom’s internal management webpage.

What’s in it for you?

  • SIP or multicast compatible
  • Upgraded processor gives V3 Intercoms faster performance
  • Night Ringer function
  • Dual speed 10/100 Mbps
  • Power-over-ethernet enabled – IEEE 802.3af compliant
  • Network volume adjustable
  • Network microphone sensitivity adjust
  • Supports SRST (Survivable Remote Site Telephony) in a Ciscos environments
  • Network firmware upgradeable
  • Tamper proof design
  • Dry contact relay for access control applications

Datasheet

Protocol

  • SIP RFC 3261 Compatible

Ethernet Interface

  • 10/100 Mbps

Power Input

  • PoE 802.3af or +5 volts at 1000mA

Codec Support

  • G711 A-Law and u-Law

Dimensions

  • 5" x 5" x 2.5" (H x W x D)

Operating Temperature

  • -30°C to 55°C

Compliance

  • FCC Class A, UL 60950