CyberData 011124 – 802.3at PoE Power Injector
(inc. of GST)
It can be used to power any 802.3at PD PoE Device, such as IP Phones, Wireless Access Points etc, and Cyberdata Ip Paging devices that are PoE capable.
Buy now, pay smarter. Learn more
Cyberdata’s PoE Injector can be used to power any 802.3at PD PoE Device, such as IP Phones, Wireless Access Points etc, and Cyberdata Ip Paging devices that are PoE capable.
The Power Injector 802.3at eliminates the need for a PoE enabled hub. In a typical installation, the Power Injector is connected between a non-PoE hub and a CyberData paging device, providing inline power capability to an Ethernet Cat 5 cable.
What’s in it for you??
- Fanless design
- Over-current protection
- Short-circuit protection
- Green mode
|90 VAC to 264 VAC|
|47 Hz to 63 Hz|
|AC Input Current|
|1.0A (RMS) and 90VAC at maximum load|
|.55A (RMS) and 240VAC at maximum load|
|Total Output Power|
|No Data degradation with DC imbalance 18mA|
|Ripple and Regulation|
|78% (typical) at maximum load, and 120VAC 60Hz|
|Transient O/P Voltage Protection|
|60V maximum at switch on and off at any AC line phase|
|Operation -20 to +50°C|
|Non-operation -20 to +65°C|
|Operation 5 to 90%|