- 10,000+ Products
- Australian Stock & Warranty
- We accept Purchase orders
Billion AVM Fritz!Repeater 3000 Wireless LAN up to 1,733 Mbit/s (5 GHz 4 x 4), up to 866 Mbit/s and 400 Mbit/s, 2 x gigabit LAN
$337.59(inc. of GST)
Buy now, pay smarter. Learn more
Thanks to its three radio units with intelligent Mesh repeating, the FRITZ!Repeater 3000 enjoys an extended range and high level of data throughput in the wireless network.
High-end WiFi in the entire home network
With its high-end equipment, the FRITZ! Repeater 3000 ensures the highest WiFi performance in the home network. With three radio units that can achieve a data throughput of up to 3,000 Mbit / s, the repeater provides a stable connection and maximum bandwidth for all connected WLAN devices. At the same time, the FRITZ! Repeater 3000 increases the range in the WLAN and ensures perfect radio coverage down to the last corner of the house and apartment.
Ultra-fast WiFi AC + AC + N
The FRITZ! Repeater 3000 uses three WLAN bands that are used in parallel in an intelligent manner: thanks to automatic band selection (dynamic cross band repeating), the FRITZ! Repeater 3000 always chooses the most efficient route to the router and the connected WLAN devices so that all connections in the home network achieve high data rates. The most demanding WLAN scenarios can be realized in this way.
Perfect in the WiFi mesh
In combination with a FRITZ! Box as the center of the WLAN Mesh, the FRITZ! Repeater 3000 shows its full potential. The WLAN Mesh combines several distributed WLAN access points into a single intelligent WLAN network. The distributed FRITZ! Devices exchange information with each other and optimize the performance of all WLAN devices. In this way, the best connection is always established where it is needed. Streaming, gaming and downloads go seamlessly and at top speed into every corner of every room. The entire WLAN practically has only one name, one password and is securely encrypted.
Maximum security and comfort
State-of-the-art encryption standards guarantee security of privacy in the entire WiFi mesh. The housing LED enables the optimal position of the FRITZ! Repeater 3000 to be determined by displaying the radio signal strength. The repeater can be easily connected to the power supply using a power supply unit. With the help of the Wi-Fi Protected Setup (WPS), the repeater installs itself at the push of a button and is integrated into the WLAN mesh within seconds.
What’s in it for you?
- Powerful mesh repeater for large application range and high Wi-Fi throughput
- Has three radio units operating simultaneously at 2.4 GHz and 5 GHz (max. throughput rates: 400 Mbit/s at 2.4 GHz [2×2], 866 Mbit/s at 5 GHz [2×2] and 1733 Mbit/s at 5 GHz [4×4])
- Optimum connection to your router or FRITZ!Box via the repeater’s own 5-GHz band with max. 4×4 (uplink) and an independent second access point in 5-GHz band (2×2) for connecting Wi-Fi devices.
- Quickly and easily increases the range of any Wi-Fi network
- Simple setup at the touch of a button
- Adopts the name and password of the existing Wi-Fi network (on any Wi-Fi router via WPS), so no changes to the Wi-Fi devices are required.
|Easy to install|
|Optimized for use with all FRITZ!Box models|
|Simple installation at the touch of a button using Wi-Fi Protected Setup (WPS)|
|Easy operation via browser-based user interface (http://fritz.repeater)|
|Ports and Interfaces|
|Connection to mains with power adapter provided (230 V, 50 Hz)|
|Wireless access point: 802.11ac (1,733 Mbit/s), 802.11n (400 Mbit/s)|
|Wireless LAN: 2 x 5 GHz, 2.4 GHz|
|2 x gigabit ports (10/100/1000 Mbit/s)|
|Measurements (W x H x D): approx. 8.8 x 18.4 x 13.6 cm|
|Total power consumption: maximum 11.4 watts, average 6 watts|
AVM Fritz!Repeater 3000 Datasheet