ALLOY POE2000SC3.20 – PoE PSE Gigabit Ethernet Media Converter 000Base-T to 1000Base-LX WDM (SC), LFP, 20Km

-22%

ALLOY POE2000SC3.20 – PoE PSE Gigabit Ethernet Media Converter 000Base-T to 1000Base-LX WDM (SC), LFP, 20Km

Availability: Out of stockSKU: POE2000SC3.20

$671.00$521.00(inc. of GST)

Or $104.20 today and more time to pay with

It can be used to power PD (Powered Device) PoE equipment such as IP phones and IP cameras via UTP or STP data cable.

Availability: Out of stock

Description

The POE2000SC3.20 Gigabit Ethernet PoE Media Converter, a POE2000 Series model, has a 10/100/1000Mbps PoE RJ-45 and a 1310nm WDM SC fibre port. Power PoE PD devices such as IP Phones and support copper-to-fibre WDM media conversion with 20Km range.

The POE2000SC3.20 Gigabit Ethernet PoE Media Converter is a dual purpose device. It supports media conversion applications between Gigabit Ethernet 10/100/1000Base-T over UTP/STP copper cable and SC terminated 1000Base-LX WDM over singlemode/singlecore fibre cable, supporting ranges of up to 20 kilometres. This type of WDM Converter multiplexes both send and receive datastreams over a single core of singlemode fibre cable, with this model POE2000SC3.20 transmitting data on the 1310nm wavelength. The POE2000SC3.20 must be used with it’s sister product, the POE2000SC5.20 on the other end of the link, or a comparable WDM device that can receive a datastream on 1310nm wavength and transmit on 1550nm. The device also supports IEEE 802.3af compliant Power over Ethernet (PoE) applications, and can be used to power PD (Powered Device) PoE equipment such as IP phones and IP cameras via UTP or STP data cable.

The POE2000SC3.20 is a model from Alloy’s POE2000 Series of PoE Media Converters. As a Media Converter, models in the series support most types of Gigabit media conversion, including 10/100/1000Mbps RJ-45 copper to 1000Base-SX multimode fibre (with either LC, SC or ST connectors, maximum link range of 550 metres), 10/100/1000Mbps RJ-45 copper to 1000Base-LX singlemode fibre (LC or SC connectors for 10, 30 or 50Km ranges), 10/100/1000Mbps RJ-45 copper to SFP providing 1000Base-SX/LX singlemode fibre (via SFP slot installed mini-GBIC modules), and 10/100/1000Mbps RJ-45 copper to 1000Base-LX WDM singlemode/singlecore fibre (SC connector, 20Km range).

The PoE capability of POE2000 Series Media Converters is comprehensive; as a PSE device, all models support signature sensing, power monitoring functions including PD discovery, classification and current limiting, PD power-out auto-detection, PD over and under current power protection, fault protection input, minimum load sensing and PSE MDI power enable / disable. All models automatically discover PD PoE devices, power them over UTP data cable to a maximum of 15.4 watts, monitor power supply, indicate operating and fault status via a comprehensive LED suite, and protect from power faults.

POE2000 Series Converters also support Link Fault Passthrough in both Far-end-Fault (FEF) and Forced Modes (FM). LFP allows these Media Converters to monitor both the fibre and copper RX ports for signal loss. In the case of a loss of RX signal on one media port, the Converter will automatically disable the TX signal to the other media port, thus passing through the link fault LED status. FEF mode enables the Converter to stop sending a link pulse to a LFP capable Converter on the other end of the cable; the link partner Converter will synchronously stop sending data, preventing loss of valuable data transmitted over an invalid link. Combining FM and FEF LFP functions supports troubleshooting and network security capability, as both end devices can be notified of a loss of fibre link and a managed switch connected to a POE2000 Series Converter can be configured to diasable the link and notify administrators of the event.

What’s in it for you??

  • Power PoE PD devices such as IP Phones, IP Cameras over UTP data cable
  • IEEE 802.3af PoE (Power over Ethernet) PSE compatible
  • Comprehensive PoE functions: PD Signature Sensing, power monitoring and current protection
  • Supports Gigabit media conversion: copper-to-fibre and mutimode/singlemode fibre-to-fibre
  • 10/100/1000Mbps auto-negotiation on RJ-45 copper port
  • Maximum fibre link ranges: 50kms (fixed fibre port models), 20Kms (WDM models) or 120 Kms (SFP model)
  • Supports 100Base-T and 100Base-TX copper-to-fibre media conversion
  • LC, SC and ST fixed fibre port connector models
  • Flexible SFP fibre interface model – install Alloy or third party mini-GBIC modules
  • WDM models for 1000Base-LX singlemode/singlecore media conversion
  • Far-End-Fault and Forced mode LFP supports easy link fault monitoring and auto link shutdown

Datasheet

tr>
Standards Compliance
IEEE802.3af Power over Ethernet
IEEE 802.3 10Base-T specification
IEEE 802.3u 100Base-TX specification
IEEE 802.3ab 1000Base-T specification
IEEE 1000Base-SX Gigabit Ethernet fibre specification
IEEE 1000Base-LX Gigabit Ethernet fibre specification
IEEE 802.3x full-duplex flow control specification
Interface/Protocol/Wavelength/Range Specifications
This Model
POE2000SC3.20: RJ-45 PoE 1000Base-T to 1000Base-LX WDM (SC) singlemode/core fibre, 1310nm Tx, up to 20Km
Other POE2000 Series Models
POE2000SFP: RJ-45 PoE 1000Base-T to SFP (fibre cable type/grade/wavelength/range determined by mini-GBIC module)
POE2000LC: RJ-45 PoE 1000Base-T to 1000Base-SX (LC), multimode fibre, 850nm, max range 550m
POE2000SC: RJ-45 PoE 1000Base-T to 1000Base-SX (SC), multimode fibre, 850nm, max range 550m
POE2000ST: RJ-45 PoE 1000Base-T to 1000Base-SX (ST), multimode, 850nm, max range 550m
POE2000LC.10: RJ-45 PoE 1000Base-T to 1000Base-LX (LC), singlemode fibre, 1310nm, max range 10Km
POE2000SC.10: RJ-45 PoE 1000Base-T to 1000Base-LX (SC), singlemode fibre, 1310nm, max range 10Km
POE2000LC.30: RJ-45 PoE 1000Base-T to 1000Base-LX (LC), singlemode fibre, 1310nm, max range 30Km
POE2000SC.30: RJ-45 PoE 1000Base-T to 1000Base-LX (SC), singlemode fibre, 1310nm, max range 30Km
POE2000LC.50: RJ-45 PoE 1000Base-T to 1000Base-LX (LC), singlemode fibre, 1310nm, max range 50Km
POE2000SC.50: RJ-45 PoE 1000Base-T to 1000Base-LX (SC), singlemode fibre, 1310nm, max range 50Km
POE2000SC5.20: RJ-45 PoE 1000Base-T to 1000Base-LX WDM (SC) singlemode/core fibre, 15500nm Tx, up to 20Km
RJ-45 Port
10/100/1000Mbps throughput
NWay auto-negotiation
Auto-MDIX
Full/Half-Duplex transmission
IEEE 802.3af compliant PoE
Fibre Optic Ports
Multimode and Singlemode Models
1000Mbps throughput
Auto-negotiation
Transmission: Full-duplex only
WDM Models
1000Mbps throughput
Auto-negotiation
Transmission: Full-duplex only
Single core of singlemode fibre cable used
TX and RX 1310/1550nm datastreams multiplexed on a single fibre core
A pair of POE2000SC3.20 and POE2000SC5.20 Converters must be used at either end of the fibre link or:
One POE2000SC3.20 (1310nm Tx) or POE2000SC5.20 (1550nm Tx) and a suitable wavelength device at other end of link
Cable Types Supported
RJ-45 Port: UTP or STP Cat 5 or higher (must be Cat 5 or higher in Gigabit Ethernet networks)
SFP Slot (SFP model): fibre cable type determined by installed mini-GBIC Transceiver module
LC/SC/ST Ports (multimode models): 50/125µm, 62.5/125µm or 100/140µm
LC/SC/ST Ports (singlemode/WDM models): 8.3/125µm, 8.7/125µm, 9/125µm or 10/125µm
Power over Ethernet Specifications
IEEE 802.3af Power over Ethernet compliant
PSE (Power Sourcing Equipment) functionality
PD Class 0 (0.44 to 13 watt supply)
PD Class 1 (0.44 to 3.8 watt supply)
PD Class 2 (3.8 to 6.5 watt supply)
PD Class 3 (6.5 to 13 watt supply)
Signature sensing
Power monitoring functions including PD (Powered Device) discovery, classification, current limiting etc
PD Power-out auto-detection
PD Over-current and Under-current power protection functions
Fault Protection Input
Minimum load sensing
PSE MDI power enable/disable
LFP (Link Fault Passthrough) Functions
LED status propagation
Far End Fault mode supported: link pulse to link partner terminated on loss of the fibre RX signal
Forced mode supported: TX signal auto-disabled, LED link fault status propagated
Other Functions
Jumbo frame (Normal Mode: 2KB, Cut-Through Mode: 9KB)
DIP Switch Configuration
DIP 1: LFP Enabled/LFP disabled
DIP 2: PoE Enabled/PoE disabled
DIP 3: Bridge Mode enabled/Cut Through Mode enabled
LED Indicators
PWR: Green, lit when +5V power source active
FX LNK/ACT: Lit - fibre port link good; Blink - fibre traffic is present
TP LNK/ACT: Lit - TP link good; Blinks - TP traffic is present
TP SPEED: Green Lit - TP speed 1000Mbps; Yellow Lit - speed 100Mbps; Off - speed 10Mbps
PoE PSE-TP: Green Lit - PoE power supply active; Red Lit - PoE power supply disrupted
4W: Green Lit - supplying PD Class 1 power
7W: Green Lit - supplying PD Class 2 power
15.4W: Green Lit - supplying PD Class 0 or 3 power
Power
100–240VAC, 47 –63 Hz internal power supply
Maximum consumption: 19W
Electromagnetic Compatibility
FCC Part 15 Class A, CE Mark, C-Tick
Mechanical
Form Factor: Standalone Desktop all-metal case
Dimensions: 133mm x 158mm x 40mm (D x W x H)
Weight: 750 grams
Environmental Specifications
Temperature: 0° to 50°C (Standard Operating)
Humidity: 5% to 90% (Standard operating)