2N Access Unit 2.0 Touch keypad & RFID – 125kHz, 13.56MHz, NFC

2N Access Unit 2.0 Touch keypad & RFID – 125kHz, 13.56MHz, NFC

Availability: In stock SKU: 9160336

$862.21 (inc. of GST)

Or $172.44 today and more time to pay with

2N® Access Unit 2.0 Touch Keypad & RFID is a compact access control unit equipped with an RFID card reader and touch keypad.

Availability: In stock

Description

2N Access Unit 2.0 Touch Keypad & RFID is a compact access control unit equipped with an RFID card reader and touch keypad. The unit has a multi-frequency RFID card reader that allows using both older 125kHz cards and smart and secure 13.56MHz ones and thus covers functions of three separate access units. The device is intended for indoor and outdoor installations.

  • Transition to smart and secured cards
  • Smart automatic calibration
  • Two-factor authentication

What’s in it for you?

  • TRANSITION TO SMART AND SECURED CARDS:Ensure a step-by-step transition from obsolete, easy-to-copy 125kHz technology to a smart, secure 13.56MHz technology without the need for a high one-time investment.
  • SMART AUTOMATIC CALIBRATION:With regular automatic calibration, the unit reliably registers and evaluates each touch and prevents detection of unwanted or false touches (e.g. raindrops)
  • TWO-FACTOR AUTHENTICATION:For an extra level of security, two-factor authentication can be set requiring users to confirm their identity by combining the RFID badge with a PIN code.
  • REMOTE CONFIGURATION AND MANAGEMENT:The 2N Access Unit 2.0 can be remotely configured via 2N® Remote Configuration cloud service or administrator can use 2N® Access Commander for bulk management
  • EASILY INSTALLED EDGE DEVICE:A single ethernet cable, Power over Ethernet, and the option to connect a door strike, exit button, or door contact directly to the unit make installation very simple.
  • SILENT ALARM:A unique code can be set on the unit that opens the door, but also triggers another action without warning the intruder, such as setting off an alarm at the building security control centre.
  • GUARANTEED VISIBILITY EVEN AT NIGHT:Thanks to backlighting with adjustable brightness, visibility of the keypad is ensured even at night or in places with minimal lighting.
  • NOTIFICATION OF INCORRECT PIN ENTRY:If anybody repeatedly enters an incorrect PIN to get into the building, the 2N Access Unit immediately notifies the administrator and blocks the keypad.
  • NFC SUPPORT:Thanks to wireless NFC technology, you can also easily open the door using a smartphone with Android OS and the 2N® Mobile Key application installed.
 
Interfaces
Power supply:PoE and/or 12V/1A DC
PoE:802.3af (Class 0–12.95W)
LAN:10/100BASE-TX with Auto-MDIX, RJ-45 modular jack
Recommended cabling:Cat-5e or better
Active switch output:8 to 12V DC/max 600mA
Passive switch:NO/NC contacts, up to 30V/1A AC/DC
Inputs:2 inputs - in passive/active mode (-30V to +30V DC)
OFF = open or Uin> 1.5V
ON = short-circuit or Uin< 1.5V
Tamper switch:native part of the 2N Access Unit 2.0
Audio:buzzer (97dBA) and microphone
Supported protocols:DHCP opt. 66, SMTP, 802.1x, TFTP, HTTP, HTTPS, Syslog
Touch Keypad
Technology:capacitive touch technology
high touch layer sensitivity (0.1pF)
Reliability:regular automatic calibration (SmartSence Auto-tunning)
does not detect false touches on wet surface
Signalling:configurable backlight intensity
indication using multicoloured LEDs
acoustic response for every keypad touch
RFID card reader
Supported frequencies:125kHz and 13.56MHz
125kHz:EM4100, EM4102, HID Prox
13.56MHz:ISO14443A, ISO14443B, NFC support
reads UID (CSN)
reads PACs ID (HID iClass cards with SIO object)
Mechanical properties
Frame:robust zinc cast frame with surface finish (nickel and black colour)
Operating temperature:-40°C to +60°C
Storage temperature:-40°C to +70°C
Operating relative humidity:10%-95% (non-condensing)
Dimensions:Wall (surface) mounting frame:
- 1 module: 107 (W) x 130 (H) x 28 (D) mm
Flush mounting frame:
- 1 module: 130 (W) x 153 (H) x 5 (D) mm
Flush mounting box (minimum hole):
- 1 module: 108 (W) x 131 (H) x 45 (D) mm
Weight:max 0.8kg
Cover rating:IP54 and IK08
Extension modules
2N Access Unit 2.0 supports modules from the 2N® IP Verso intercom: RFID card readers, touch keypad, fingerprint, Bluetooth reader, I/O module, Wiegand, etc.

9160336 Datasheet