2N Access Unit 2.0 Bluetooth & RFID – 125kHz, secured 13.56MHz, NFC


2N Access Unit 2.0 Bluetooth & RFID – 125kHz, secured 13.56MHz, NFC

Availability: Out of stock SKU: 9160335-S

$1,160.01 (inc. of GST)

Or $232.00 today and more time to pay with

The 2N® Access Unit 2.0 Bluetooth & RFID access control unit reads all the wide-spread RFID cards on the market and simultaneously communicates with your smartphone via bluetooth that can fully, and for free, substitute these cards.

Availability: Out of stock


The 2N Access Unit 2.0 Bluetooth and RFID is based purely on IP technology. It combines the functions of a traditional controller with the functions of end access device. The unit is available in versions with keypad, RFID card reader, fingerprint reader or Bluetooth. Its characteristic design is striking, also being attractive thanks to simple installation and configuration. Naturally, it can also be connected to 2N IP intercoms, gaining you a comprehensive access control system solution which you can manage easily via 2N Access Commander.

Easily installed edge device

A single Ethernet cable (PoE) and a possibility to connect a door strike and REX button directly to the unit make the installation absolutely simple.

Transition to secure cards

Now you have only one device which ensures a stepby-step transition from obsolete, easy-to-copy 125kHz technology to a smart, more secure 13.56MHz.

Remote configuration and management

The 2N Access Unit 2.0 can be remotely configured via 2N® Remote Configuration cloud service or administrator can use 2N Access Commander for bulk management.

What’s in it for you?

  • Convenience of mobile credentials
  • Mobile credentials for free
  • Multi-frequency RFID card reader
  • Different modes of user’s authentication
Power supply: PoE and/or 12V/1A DC
PoE: 802.3af (Class 0–12.95W)
LAN: 10/100BASE-TX with Auto-MDIX, RJ-45 modular jack
Recommended cabling: Cat-5e or better
Active switch output: 8 to 12V DC/max 600mA
Passive switch: NO/NC contacts, up to 30V/1A AC/DC
Inputs: 2 inputs - in passive/active mode (-30V to +30V DC) OFF = open or Uin> 1.5V ON = short-circuit or Uin< 1.5V
Tamper switch: native part of the 2N Access Unit 2.0
Audio: buzzer (97dBA) and microphone
Supported protocols: DHCP opt. 66, SMTP, 802.1x, TFTP, HTTP, HTTPS, Syslog
Bluetooth reader
Version: compatible with Bluetooth 4.0 or higher (BLE)
Range: adjustable (short ~ 0.5m, medium ~ 2m, long ~ up to 10m)
Security: RSA-1024 and AES-128 encryption
RX sensitivity: up to -93dBm
Mobile application support
Android 6.0 and higher, iOS 11.0 and higher
RFID card reader
Supported frequencies: 125kHz and 13.56MHz
125kHz: EM4100, EM4102, HID Prox
13.56MHz: ISO14443A, ISO14443B, NFC suppor treads UID (CSN) reads PACs ID (HID iClass cards with SIO object)
Mechanical properties
Frame: robust zinc cast frame with surface finish (nickel and black color)
Operating temperature: -40°C to +60°C
Storage temperature: -40°C to +70°C
Operating relative humidity: 10%-95% (non-condensing)
Dimensions: Wall (surface) mounting frame:- 1 module: 107 (W) x 130 (H) x 28 (D) mm Flush mounting frame:- 1 module: 130 (W) x 153 (H) x 5 (D) mm Flush mounting box (minimum hole):- 1 module: 108 (W) x 131 (H) x 45 (D) mm
Cover rating: IP54 and IK08
Extension modules
2N Access Unit 2.0 supports modules from the 2N® IP Verso intercom: RFID card readers, keypad, fingerprint, Bluetooth reader, I/O module, Wiegand, etc