2N Access Unit 2.0 RFID – 125kHz, secured 13.56MHz, NFC

-21%
9160334-S-2N

2N Access Unit 2.0 RFID – 125kHz, secured 13.56MHz, NFC

Availability: In stockSKU: 9160334-S
0 out of 5
( There are no reviews yet. )

$1,208.90$952.00(inc. of GST)

Or $190.40 today and more time to pay with

The 2N Access Unit 2.0 RFID access control unit has a multi-frequency RFID card reader that allows the simultaneous use of older 125kHz cards and new, secure 13.56MHz smart cards.

Availability: In stock

Description

The 2N Access Unit 2.0 has a multi-frequency RFID reader supporting 125kHz as well as 13.56MHz credentials, which allow a transition to modern access control in a very smooth way, minimising one-off costs. A lot of companies are still using the old, unsecure proximity technology that can be easily compromised.

The innovative 2N Access Unit 2.0 is based purely on IP technology. It combines the functions of a traditional controller with the functions of end access device. The unit is available in versions with keypad, RFID card reader, fingerprint reader or Bluetooth. Its characteristic design is striking, also being attractive thanks to simple installation and configuration. Naturally, it can also be connected to 2N IP intercoms, gaining you a comprehensive access control system solution which you can manage easily via 2N Access Commander.

Easily installed edge device

A single Ethernet cable (PoE) and a possibility to connect a door strike and REX button directly to the unit make the installation absolutely simple.

Transition to secure cards

Now you have only one device which ensures a stepby-step transition from obsolete, easy-to-copy 125kHz technology to a smart, more secure 13.56MHz.

Remote configuration and management

The 2N Access Unit 2.0 can be remotely configured via 2N® Remote Configuration cloud service or administrator can use 2N Access Commander for bulk management.

What’s in it for you?

  • Multi-frequency RFID card reader
  • Minimum wiring requirements
  • Same design as IP intercoms
  • Remote configuration and administration
Interfaces
Power supply:PoE and/or 12V/1A DC
PoE:802.3af (Class 0–12.95W)
LAN:10/100BASE-TX with Auto-MDIX, RJ-45 modular jack
Recommended cabling:Cat-5e or better
Active switch output:8 to 12V DC/max 600mA
Passive switch:NO/NC contacts, up to 30V/1A AC/DC
Inputs:2 inputs - in passive/active mode (-30V to +30V DC) OFF = open or Uin> 1.5V ON = short-circuit or Uin< 1.5V
Tamper switch:native part of the 2N Access Unit 2.0
Audio:buzzer (97dBA) and microphone
Supported protocols:DHCP opt. 66, SMTP, 802.1x, TFTP, HTTP, HTTPS, Syslog
RFID card reader
Supported frequencies:125kHz and 13.56MHz
125kHz:EM4100, EM4102, HID Prox
13.56MHz:ISO14443A, ISO14443B, NFC support reads UID (CSN) reads PACs ID (HID iClass cards with SIO object)
Mechanical properties
Frame:robust zinc cast frame with surface finish (nickel and black colour)
Operating temperature:-40°C to +60°C
Storage temperature:-40°C to +70°C
Operating relative humidity:10%-95% (non-condensing)
Dimensions:Wall (surface) mounting frame:- 1 module: 107 (W) x 130 (H) x 28 (D) mm Flush mounting frame:- 1 module: 130 (W) x 153 (H) x 5 (D) mm Flush mounting box (minimum hole):- 1 module: 108 (W) x 131 (H) x 45 (D) mm
Weight:max 0.8kg
Cover rating:IP54 and IK08
Extension modules
2N Access Unit 2.0 supports modules from the 2N® IP Verso intercom: RFID card readers, touch keypad, fingerprint, Bluetooth reader, I/O module, Wiegand, etc.

9160334-S Datasheet

Related products