- 10,000+ Products
- Australian Stock & Warranty
- We accept Purchase orders
- Description
- Specifications
- Resources
- Reviews
Description
The 2N Access Unit 2.0 RFID access control unit has a multi-frequency RFID card reader that allows the simultaneous use of older 125kHz cards and new, secure 13.56MHz smart cards. Its greatest benefits are simple installation using a single ethernet cable, remote administration and hardware and software security.
- Multi-frequency RFID card reader
- Minimum wiring requirements
- Same design as IP intercoms
What’s in it for you?
Interfaces | |
Power supply: | PoE and/or 12V/1A DC |
PoE: | 802.3af (Class 0–12.95W) |
LAN: | 10/100BASE-TX with Auto-MDIX, RJ-45 modular jack |
Recommended cabling: | Cat-5e or better |
Active switch output: | 8 to 12V DC/max 600mA |
Passive switch: | NO/NC contacts, up to 30V/1A AC/DC |
Inputs: | 2 inputs – in passive/active mode (-30V to +30V DC) |
OFF = open or Uin> 1.5V | |
ON = short-circuit or Uin< 1.5V | |
Tamper switch: | native part of the 2N Access Unit 2.0 |
Audio: | buzzer (97dBA) and microphone |
Supported protocols: | DHCP opt. 66, SMTP, 802.1x, TFTP, HTTP, HTTPS, Syslog |
RFID card reader | |
Supported frequencies: | 125kHz and 13.56MHz |
125kHz: | EM4100, EM4102, HID Prox |
13.56MHz: | ISO14443A, ISO14443B, NFC support |
reads UID (CSN) | |
reads PACs ID (HID iClass cards with SIO object) |
Mechanical properties | |
Frame: | robust zinc cast frame with surface finish (nickel and black colour) |
Operating temperature: | -40°C to +60°C |
Storage temperature: | -40°C to +70°C |
Operating relative humidity: | 10%-95% (non-condensing) |
Dimensions: | Wall (surface) mounting frame: |
– 1 module: 107 (W) x 130 (H) x 28 (D) mm | |
Flush mounting frame: | |
– 1 module: 130 (W) x 153 (H) x 5 (D) mm | |
Flush mounting box (minimum hole): | |
– 1 module: 108 (W) x 131 (H) x 45 (D) mm | |
Weight: | max 0.8kg |
Cover rating: | IP54 and IK08 |
Extension modules | |
2N Access Unit 2.0 supports modules from the 2N® IP Verso intercom: RFID card readers, touch keypad, fingerprint, Bluetooth reader, I/O module, Wiegand, etc. |