2N Access Unit – Bluetooth

-25%

2N Access Unit – Bluetooth

Availability: In stock SKU: 916013

$623.00 (inc. of GST)

Or $124.60 today and more time to pay with

Access Unit with bluetooth reader for access via your smartphone (shown with mounting frame – not included)

View cartAvailability: In stock

Description

An IP access control unit that lets users open a door using Bluetooth technology (BLE) and a smartphone or tablet. All you need is the 2N Mobile Key installed on your mobile device. The 2N® Access Unit Bluetooth also supports two-factor user identification and is designed for locations with high security levels.

  • Mobile credentials for free
  • Adjustable range for opening doors
  • Simple pairing process

What’s in it for you?

  • DIFFERENT MODES FOR DOOR OPENING:Choose, whether the user opens a door through an application in their smartphone or keeps the phone in their pocket and opens the door by simple touching the unit.
  • MOBILE CREDENTIALS ARE FREE:Unlike our competitors, 2N offers free mobile credentials. Other providers may charge you $6 to $10 per each credentialed user’s ‘virtual card.’ Simply install the 2N app and use its convenience and safety without further fees!
  • SECURITY COMPARABLE WITH INTERNET BANKING:Thanks to Bluetooth v4 (BLE) technology and encrypted communication between the access control unit and the 2N Mobile Key application, your access details cannot be misused.
  • SIMPLE PAIRING PROCESS:You simply pair your mobile telephone with the access control unit in just three steps. To pair several units at once, you can use 2N Access Commander.
  • ADJUSTABLE COMMUNICATIONS DISTANCE:Set the mobile telephone’s range for opening doors according to the type of installation – long distance for garage entry or short distance for passing through turnstiles.
  • TWO-FACTOR AUTHENTICATION:For an extra level of security in guarded areas, for example, outside regular business hours, two-factor authentication can be set requiring users to confirm their identity by combining one mode of door opening with a PIN code entered in the application.
  • SIMPLE INSTALLATION:A single ethernet cable, Power over Ethernet, and the option to connect a lock, exit button, or door contact directly to the unit make installation very simple.
  • ADMINISTRATION VIA WEB INTERFACE:Simply connect the access control unit to your LAN and everything can be set up via the intuitive web interface.
  • TAMPER PROTECTION:2N Access Unit Bluetooth is equipped with a mechanical protective switch. As soon as anyone attempts to damage the unit mechanically, the switch is activated and an alarm is set off.
  • MONITORING ENTRANCES AND EXITS:Other expansion modules (e.g. an exit Bluetooth module, RFID reader, or keypad etc.) can be connected to the 2N® Access Unit Bluetooth, allowing you to secure a door easily from both sides.
    INDOOR AND OUTDOOR USE
    Thanks to its mechanical properties, the access unit is designed for either indoor or outdoor installation.
  • DON’T PAY FOR NEW RFID CARDS:Thanks to the 2N Access Unit Bluetooth and the 2N Mobile Key application, you no longer need to pay for each new or replaced RFID card. Our application replaces these cards and is free of charge.
Description 916013
Audio: Speaker 0.8W/8ohm
Interface: Power 12v +-15% / 2A DC or PoE
PoE PoE 802.3af (Class 0 – 12.95W)
LAN 10/100BASE-TX s Auto-MDIX, connecting block or RJ-45 pigtail
Supported protocols DHCP opt. 66, SMTP, 802.1x, TFTP, HTTP, HTTPS, Syslog
Passive switch Make and break contact, max. 30 V / 1 A AC/DC
Active switch output 8 to 12 V DC according to power source (PoE: 10 V; adapter: source voltage minus 2 V), max 400 mA
Compatibility 4.0 Bluetooth and higher (Bluetooth Smart)
Reception sensitivity Up to -93 dBm
Range More than 10 m (configurable)
Consumption 20mA at 12V DC
Reception sensitivity Up to -93 dBm
Range More than 10 m (configurable)
Consumption 20mA at 12V DC
Dimensions: Frame for fitting on surface 107(W) x 130(H) x 28(D) mm
Dimensions: Frame for recess fitting in wall 130(W) x 153(H) x 5(D) mm
Box for mounting in wall (dimension of minimum hole in wall) 108(W) x 131(H) x 45(D) mm
Dimensions 99(W) x 123(H) x 29(D) mm
Weight (Net) 0.40kg
Weight (Gross) 0.70kg