11324 – SIP Paging Amplifier (Replaces 011061)

-9%

11324 – SIP Paging Amplifier (Replaces 011061)

Availability: Out of stock SKU: 11324

$1,096.00 (inc. of GST)

Or $219.20 today and more time to pay with

SIP Paging Amplifier

Availability: Out of stock

Description

The new CyberData SIP-enabled Paging Amplifier provides an easy method for implementing an IP-based overhead paging system for both new and legacy installations.

Now with up to 9 user-stored messages, the Amplifier provides direct drive of up two 8 Ohm horn speakers. The interface is compatible with most SIP-based IP PBX servers that comply with the SIP RFC 3261. For non-SIP environments, the Paging Amplifier can be configured to listen to multicast address and port number combinations to form paging zones.

What’s in it for you?

• Enhanced interoperability for hosted environments
– CyberData has maintained one of the most comprehensive list of IP PBX servers certified to work with CyberData
• Support for G.722 codecs.
• 802.11q VLAN tagging
• Configurable sense input for use with fault detection or lighted button kit
• Configurable event generation for device health and status monitoring
• Optional direct connect RGB strobe kit connection
• HTTP Command Interface
– 9 user-uploadable page messages
• Support for security code access for SIP paging
• Autoprovisioning via HTTPS
• HTTPS web based configuration
• 10 channel prioritized Multicast ports
• Built-in diagnostics
• Delayed page support
• Cisco SRST
• SIP and Simultaneous Multicast
• Dual-speed ethernet 10/100 Mbps
• Web-based configuration
• PoE 802.3at and 802.3af-enabled
• Line-in for background music
• Line-out connection
• DTMF controlled relay
• Direct 8 Ohm speaker drive
• User-uploadable tones and messages
• Digital and manual volume control
• Second SIP endpoint “Night Ringer”
• Autoprovisioning
• Auto-call voice message from input port

Ethernet Interface
10/100 Mbps
Protocol
SIP RFC 3261 Compatible
Power Input
PoE 802.3at or 802.3af
Audio Output
802.3af - SPL 114 dB @ 1 meter (When used with the 011068 Mini Horn.)
802.3at - SPL 117 dB @ 1 meter (When used with the 011068 Mini Horn.)
Line In
Input Signal Amplitudes: 2.0 VPP maximum
Input Impedance: 10k Ohm
Line Out
Output Signal Amplitudes: 2.0 VPP maximum
Output Level: +2dBm nominal
Total Harmonic Distortion: 0.5% maximum
Output Impedance: 10k ohm
Operating Temperature
-10 degrees C to 50 degrees C (14 degrees F to 122 degrees F)
Payload Types
G.711 µ-law, G.711 a-law, and G.722
Dimensions
1.042 in. [26.5 mm] Length, 3.295 in. [83.7 mm] Width, 7.795 in. [198.0 mm] Height
Weight
1.4 lbs. [0.63 kg]